BATTERY CARE
OWNERS MANUAL
V1.1 | 2021
Page | 21
1.
Red light means charging
2.
Green light means battery fully charged
3.
Input: AC100-240V
～
, 1.6A (Max) 50/60Hz
4.
Output: 42.00V
—
3.0A
5.
Plug the charger into the outlet and turn the charger “ON” via the switch
.
6.
The red power light on the front of the charger will illuminate when the charger is
working properly.
7.
Insert the XLR plug into the charger port on the bike being sure the charger plug is
fully placed in the charger port. The second light will start to flash orange for
several seconds while the charger is “seeking” the battery.
8.
Once the charger has “found” the battery the
blinking orange light will stop
flashing and turn solid orange and cooling fan will start. At this point, the charging
process has begun.
9.
Once the battery is fully charged, the orange light will turn solid green.
10.When charging is complete, unplug the charger from the wall before removing it
from the charger port.
**Be sure to charge for the suggested time. If the battery still has not charged, you
may need to replace it.
Using any other charger than supplied will damage the batteries and void your
warranty.
