Made in USA
ELECTRIC MIRROR, LLC
Seattle, WA • USA
T +1 425 776–4946
F +1 425 491–8200
www.electricmirror.com
ELECTRIC MIRROR®
THE LEADER IN LIGHTED MIRROR AND MIRROR TV TECHNOLOGY
© 2013 ELECTRIC MIRROR®
Luminaire
Disconnect
Chassis Knockout
Ground Push-In
Connector
Luminaire Disconnect
Neutral (White)
3) Wiring Details
Please note, all electrical installations should be carried out by a fully qualified
electrician in conformance with the National Electrical Code and local building codes.
4) Power Connection
Before proceeding to power supply wiring, make sure the MC cable is brought in through the wall and
into the chassis knockout.
Insert ground wire in the grounded connector. Insert the power and neutral wires into the luminaire
disconnect. The power wire is inserted into the black port (number 1) and the neutral wire is
inserted into the white port (number 2).
Installation
1) Mounting chassis on the wall
Before mounting chassis on wall, identify mirror location on wall. Drill marks should be measured
from the edge of the mirror
NOT FROM EDGE OF CHASSIS
.
There are multiple mounting holes that can be chosen from to accommodate mounting locations. The
chassis shall be installed with a minimum of (4) 1/4" x 1-1/2" lag screws or other engineering approved
fasteners. Use wall anchors or reinforced backing areas to support chassis. See individual product
specifications for mounting hole locations.
2) Install lamps.
Power (Black)
