EN
4
1. CALL:
When called from the outdoor panel, the terminal rings
– 3 x Ding-dong. The LED is blinking red.
2. RINGING VOLUME ADJUSTMENT:
The terminal has 2 volume
levels and they can be adjusted by short successive touches of the
BEEP
key. The maximum level is signaled with 2 x [ ].
BEEEEP
3. RINGER OFF (MUTE):
Long press of [
] and LED
turning red. The terminal has the ringer off and the LED remains red.
The call will be signaled by LED blinking red. For reversing mute
BEEEEP
status, short touch of [
] and LED turning off.
4. ANSWERING THE CALL:
Short touch of Talk is initiated.
5. TALK:
Hands-free conversation, without touching any key.
The talk duration is max. 2 min.
6. TALK VOLUME ADJUSTMENT:
The terminal has 2 volume levels
and they can be adjusted by short successive touches of the
BEEP
key. The maximum level is signaled with 2 x [ ].
7. END TALK
without access
:
Another short touch of .
8. ACCESS GRANTING:
From
Long press of .
stand-by
During , or
Short touch of any time.
call talk monitoring
The access is signaled acoustically also, with a specific confirmation
song and the bidirectional audio communication remains opened
10 more sec.
9. AUDIO MONITORING:
Short touch of Bidirectional talk
for max. 10 sec.
6
Programming the terminals
EN
The manual programming of the address of the terminal
(apartment number/ family)
All
Touch Line
terminals are programmed from the factory with
address 1
.
The terminals from apartments with numbers from 2 to 9999 will be
programmed with the number (address) of the respective
apartment / family.
The address of the terminals with numbers from 2 to 20 can be
manually programmed, according to the following procedure:
0.
The entire door phone system is installed and set under tension.
1.
Go to the place where the
SCU
central unit of the installation is
mounted. Long press (2-3 sec.) the
PROG
button. The red LED turns on.
2.
Return to the terminal and long touch the key. You will hear a
long beep.
- Programming
address 1
: touch the key
once
. A short beep is issued.
- Programming
address 2
: touch the key
twice
. Two short beeps
are issued.
- Programming
address 3
: touch the key
three times
. Three short
beeps are issued.
