1-3
INTRODUCTION
Revision Y06-01
Service Manual - WNG/LEX DCI
1.6 Control
The microprocessor indoor controller, and an infrared remote control, supplied as
standard, provide complete operating function and programming.
Remote controllers: RC-2/3/4/5/7, RC-4i-1, RCW, μBMS.
Networking system Airconet version 4.2 and up, MIU SW version H8 and up.
For further details please refer to the Operational Manual, Appendix A.
1.7 Outdoor
Unit
The WNG DCI INV / LEX DCI INV outdoor units can be installed as floor or wall
mounted units by using a wall supporting bracket. The metal sheets are protected
by anti- corrosion paint work allowing long life resistance. All outdoor units are pre-
charged. For further information please refer to the Product Data Sheet, Chapter 2.
●
ONG 25 DCI
●
ONG 35 DCI
Outdoor Unit Feature
Feature
ONG 25, 35 DCI
Display
3 LED’s
Base Heater
Optional
Outdoor Fan
Variable speed DC Inverter
M2L cable Port
No
1.8 Tubing
Connections
Flare type interconnecting tubing to be produced on site.
For further details please refer to the Installation Manual, Chapter 9.
1.9 Accessories
Item
Description
MIU (WNG/LEX)
MODBUS interface unit
MIU (K)
MODBUS interface unit
RS485 Adapter
To be used as an interface
with RCW or μBMS remote
controllers
Base Heater
M2L cable Port
For further details please refer to Optional Accessories, Chapter 17.
1.10 Inbox
Documentation
Each unit is supplied with its own installation and operation manuals.
