Electia Icon LCD, Руководство пользователя, Страница: 55 / 58

55
Keys) you are going to learn, say, the Prog Up key from an
existing remote and store it under the Prog Up key on the ICON
remote. Or learn the Power key from an existing remote and
store it under the Power key on the ICON remote, etc. If you
press a left Side Key (to select Side Keys) you are going to learn,
say, the “DVD Zoom” function from an existing remote and store
it under a Side Key on the ICON remote. You will then be able to
name the key “DVD Zoom” and access this “DVD Zoom” function
from the Mode screen when the remote is in the mode that you
selected when you learned this “DVD Zoom” command.
Learning Main Keys
At the Home screen press the Side Key next to Setup and then
on the Side key next to Learn.
Then press one of the top 4 Side Keys K6-K9 to the right of the
screen. Select the Device you want to learn keys for. In this
example we only have a TV, Cable Box and Satellite Receiver set
up, so the rest are greyed out, but you can still select any of the
devices to learn commands for. You are then instructed to line
up the remotes, and press the key on the ICON remote that you
want to learn. You then point the remote you want to learn
commands from at the bottom of the ICON remote, and press
the key on the ICON remote that you want to learn a command
under, e.g., the Power key. You then press and hold (in this
example) the Power key on the other remote, until the display
shows that the command has been successfully learned. Note
for some types of key you might need to hold the key pressed,
but for other types a quick press is sufficient. Experiment a bit. If
keys you learn are sent multiple times try learning them with
just a quick press. (See Tips on Learning on page 19). If the
screen says Failure, you can press the key and try again. You can
continue learning more individual keys by following the
instructions on the screen, and then press Done when you’re
finished.
Learning Side Keys
At the Home screen press the Side Key next to Setup and then
on the Side key next to Learn. Then press any of the Side Keys
K1-K5 to the left of the screen. Select the device you want to
learn keys for. In this example we only have a TV, Cable Box and
Satellite Receiver set up, so the rest are greyed out, but you can
still select any of the devices to learn commands for. In this case
we selected TV. Some typical “extra” keys are already set up,
(depending on the Mode you selected), the rest of them are
called L6, L7, L8, etc., 27 keys in total. (You can rename them later). Press the Side Key that