6. Infrared remote control unit for the CableLink
General: You need the 6in1 remote control to control the CableLink.
Control Elements:
[1] CBL:
selects the CableLink
[2] 0 -9 :
direct TV channel selection
[3] C/-:
for paging up and down through the cable TV Channels
[4] Prev. CH:
for switching back to the channel last selected
[5] CATV/AV:
for switching Video signal (SAT or VCR) and cable TV channels
[6] PASTE (TEXT ON):
Adds the TV Channel from the “clipboard” to the current
position in the list after first pushing up the current channel and those above it. The
TV Channel on the “clipboard” is then removed from it’s old position in the list . The
TV screen shows the new channel with “ADDED” superimposed on the picture.
[7] COPY (TEXT OFF):
Copies the current TV Channel Number to the internal
“clipboard” so that it can be moved to another position in the list. The screen will
display “COPIED. READY TO MOVE”
[8] DISP:
Displays the selected mode : Channel number or “A/V” mode depending of
the selected source (integrated tuner or other external appliance)
[9] SCAN:
automatic search tuning for TV and cable TV transmitters (to start the
automatic search tuning press “SCAN” twice)
[10] CH DEL (PLAY) :
Delete cable TV channels. To delete a channel, select the one
you want to delete, such as No. 30 and press “CH DEL“. “TV30 DELETED” will
appear in the screen. Next time you page through the channels, No. 30 will no
longer appear.
[11] SET:
To change the security code of your
remote control. Use this function if you
have several Cable links at home (see
section 12).
7. Programming the cable tuner
The Cable Tuner is like your TV. It needs to scan and find the available channels. You program the CableLink using the infrared
remote control unit (via the VR36).
1.
Switch on the television set to which the VR50E is connected and select the video input (AV) (5) .
2.
Switch on the VT30CT Video Transmitter and the VR50E Video Receiver.
3.
The television set will display either a blank screen if it’s a fresh VT30CT , or the current channel if it’s previously been set
up.
4.
Channel Search: press “Scan” (9) display shows “press again to confirm” press “Scan” again within 4 seconds
5.
Display shows “ scanning pls wait” and a barchart to show the progress of the scan.
6.
Automatic scan is conducted , approx. 6 minutes
7.
Display will then show “ scan complete” – “found XYZ channels”, then TV will switch to the first of the found channels
8.
With the c and the channel – (3) button you can browse the found channels
9.
To delete channels, press the “CH DEL“ button (10)
10.
You might be able to improve the quality of a ‘weak’ channel by pressing the FINE TUNE + or -buttons to manually adjust
the setting. Step through to the channel using the C or - keys and press Fine Tune + or-until you get the best
picture. If you want to save this setting for future use just press COPY then PASTE . The ‘old’ setting will be replacd in the
list by the new one .
Rearranging the Channel List
CHAN+ and CHAN- can be used to move through the Channel List. This can also be done by keying the Channel directly using the
0-9 Keys on the handset .
Whenever a channel is found who’s quality is poor or is not a real video channel and needs to be removed from the list, the CHAN
DEL (PLAY) key can be used to do this. After pressing CHAN DEL the screen displays the channel number and ‘DELETED’ is
superimposed on the picture. The old channel is then erased from the list and the list rearranged to fill the gap. Initially the tuner still
shows the old channel, but after 4 seconds it re-tunes to the next channel up and this becomes the new Current Channel.
It’s not necessary to wait the 4 seconds before pressing another key however. The unit will respond instantly to any subsequent key
press, so if you use CHAN DEL and then follow it immediately with CHAN + you need to be aware that although the screen still
shows the channel you have just deleted, internally the unit has already replaced it with the next channel in the list , so an immediate
CHAN + will appear to move up two channels from the one you had just deleted after the 4 sec. has elapsed .
You can alter the order of channels in the Channel List using the COPY (TEXT OFF) and PASTE (TEXT ON) keys.
COPY copies the Current Channel to an internal Clipboard and marks the channel on the list for deletion once the contents of the
clipboard have been pasted into the selected position. Subsequent COPY operations just put the new channel onto the clipboard,
mark it for deletion after use and ‘un-mark’ the previous channel.
