![background image](http://html1.mh-extra.com/html/elecro-engineering/hr-30-b/hr-30-b_installation-and-operating-manual_2378724005.webp)
5
3. GENERAL INSTALLATION INSTRUCTION
3.1 Mounting instructions
The device should be either installed horizontally or vertically allowing enough space for the pipe
connections, wiring and maintenance of lamps/quartz sleeve(s). It should be firmly secured, using the
fixing kit provided, to a solid wall.
NOTE:
When mounting the UV, it is essential to leave a clearance space of at least 1 metre
from one side of the unit to allow access to replace the lamp(s) and/or quartz
sleeve(s) when required. Both the lamps and the quartz sleeve can be replaced
from either end of the unit; if installing vertically the 1m clearance space must be
above or below the unit, if installing horizontally the 1m clearance space must be to
the left or right of the unit.
WARNING:
The device must be installed within a dry, permanent weather-proof area. In any
case where water or moisture enters the enclosure the warranty will be void.
Caution:
If the device is unused during the winter months, it must be drained to prevent frost
damage. Water must not be allowed to freeze inside the unit as this will cause severe
damage.
See Fig. 3 for mounting instructions when securing to the wall or floor.
Fig.3
3.2 Pipe work
The device should be placed downstream (after) of any pumps, filters and heating devices but upstream
(before) of any chemical dosing or similar water treatment (see Figs. 4 and 5).
Содержание HR-30-B
Страница 1: ...MINI H R UV C STANDARD Installation Operating Manual HR 30 B ENGLISH...
Страница 4: ...4 Fig 1 Dimensions Fig 2...
Страница 14: ...14 Notes...