ELECRAFT KX3-2M Скачать руководство пользователя страница 32

 

 

 

32

Customer Service and Support 

Technical Assistance 

You can send e-mail to 

[email protected]

 and we will respond quickly – typically the same day 

Monday through Friday. If you need replacement parts, send an e-mail to 

[email protected]

. Telephone 

assistance is available from 9 A.M. to 5 P.M. Pacific time (weekdays only) at 831-763-4211. Please use e-
mail rather than calling when possible since this gives us a written record of the details of your problem and 
allows us to handle a larger number of requests each day.  

Repair / Alignment Service 

If necessary, you may return your Elecraft product to us for repair or alignment. (Note: We offer unlimited 
email and phone support, so please try that route first as we can usually help you find the problem quickly.)  

IMPORTANT: You must contact Elecraft before mailing your product 

to obtain authorization for the 

return, what address to ship it to and current information on repair fees and turnaround times. (Frequently 
we can determine the cause of your problem and save you the trouble of shipping it back to us.) Our repair 
location is different from our factory location in Aptos. We will give you the address to ship your kit to at 
the time of repair authorization. 

Packages shipped to Aptos without authorization will incur an additional 

shipping charge for reshipment from Aptos to our repair depot

Elecraft 1-Year Limited Warranty 

This warranty is effective as of the date of first consumer purchase (or if shipped from the factory, the date the 
product  is  shipped  to  the  customer).  It  covers  both  our  kits  and  fully  assembled  products.  For  kits,  before 
requesting warranty service, you should fully complete the assembly, carefully following all instructions in the 
manual. 

Who is covered:  

This warranty covers the original owner of the Elecraft product as disclosed to Elecraft at the 

time of order. Elecraft products transferred by the purchaser to a third party, either by sale, gift, or other method, 
who is not disclosed to Elecraft at the time of original order, are not covered by this warranty. If the Elecraft 
product is being bought indirectly for a third party, the third party’s name and address must be provided at time 
of order to ensure warranty coverage. 

What is covered:

  During the first year after date of purchase, Elecraft will replace defective or missing parts 

free of charge (post-paid). We will also correct any malfunction to kits or assembled units caused by defective 
parts and materials. Purchaser pays inbound shipping to us for warranty repair; we pay shipping to return the 
repaired equipment to you by UPS ground service or equivalent to the continental USA and Canada. For Alaska, 
Hawaii, and other destinations outside the U.S. and Canada, actual return shipping cost is paid by the owner. 

What is not covered:

 This warranty does not cover correction of kit assembly errors. It also does not cover 

misalignment;  repair  of  damage  caused  by  misuse,  negligence,  battery  leakage  or  corrosion,  or  builder 
modifications; or any performance malfunctions involving non-Elecraft accessory equipment. The use of acid-
core solder, water-soluble flux solder, or any corrosive or conductive flux or solvent will void this warranty in 
its entirety. Also not covered is reimbursement for loss of use, inconvenience, customer assembly or alignment 
time, or cost of unauthorized service. 

Limitation of incidental or consequential damages: 

This warranty does not extend to non-Elecraft equipment 

or components used in conjunction with our products. Any such repair or replacement is the responsibility of the 
customer. Elecraft will not be liable for any special, indirect, incidental or consequential damages, including but 
not limited to any loss of business or profits. 

 

Содержание KX3-2M

































Отзывы: