- 2 -
Troubleshooting
When the product appears to be
malfunctioning
When the mouse pointer on the screen does not move, or
moves unstably, when the mouse is moved
It is possible that the reflectivity of the surface on which this product
is being used is not suitable for a laser mouse. Use this product on a
mouse pad that is designed for use with laser mice.
When using this product on a metallic surface such as a steel desk,
radio wave outreach may be shortened. In such cases, move the
receiver unit closer to the mouse until mouse operation stabilises.
It is possible that the receiver unit is not connected correctly to
the USB port. Disconnect the receiver unit from the USB port and
reconnect it.
The receiver unit and the mouse body are too far apart or there is a
possibility that the receiver unit is facing in a direction from which it
cannot receive radio signals.
Approximately
10 m
Receiver unit
Adjust the position of the receiver
unit. The operable range of this
product is the area within a circle
with a radius of 10 m from the
receiver unit. Depending on the
usage environment, the mouse
may not operate even when it is
within approximately 10 m of the
receiver unit. In such cases, move
the mouse closer to the receiver
unit until operation stabilises.
Interference may occur if multiple units of this product are used
together or if this product is used with other wireless devices. In this
case, change the channel of other wireless devices.
(Multiple units of this product have an automatic channel avoidance
function.)
Operation becomes unstable when battery power is low. See
“Installing·Replacing the Battery” on the reverse of this sheet, and
replace the batteries as soon as possible.
The alkaline batteries supplied with this product are for checking
•
product operation. These batteries may discharge and drain
during storing and shipping.
* When not using the mouse, turn it off to save battery power.
It is possible that the standard Windows mouse driver did not install
correctly and that this product is detected as an unknown device by
Windows®. This product is usually detected as a USB human interface
device. If it is detected as an unknown device, see “Removing an
unknown device,” and after removing the device from Device Manager,
repeat “Step 2 - Installing the Receiver Unit” on the front of this sheet.
If you have installed drivers and settings utilities produced by the original
manufacturer for a previous mouse, uninstall them first. This product may
not operate correctly if a driver made by another company is installed. See
the instruction manual that was supplied with your previous mouse for
uninstall instructions.
It is possible that the driver is conflicting with another driver such
as that for a laptop touch pad. To use this product correctly, you
must delete the touch pad driver. However, if you delete this driver,
you may not be able to use the touch pad or touch pad functions.
Contact the PC manufacturer for more details.
The wheel moves, but the mouse cursor does not
In certain applications that do not support the scrolling function, the
mouse cursor will not move when you move the wheel.
Removing an unknown device
If the standard Windows mouse driver did not install correctly and this
product is detected as an unknown device, remove the unknown device
from Device Manager, and then repeat “Step 2 - Installing the Receiver Unit”
on the front of this sheet.
If there are multiple unknown devices, before removing a
●
device, check that it is actually this product. Disconnect the
receiver unit and check which unknown device disappears.
The device that disappears is this product.
If the unknown device does not disappear even after you
●
have deleted the driver following the instructions below,
it is possible that there is something wrong with the PC.
Contact the PC manufacturer.
With the receiver unit connected to the PC, follow the procedure below
to remove the unknown device.
* Be sure to log on using an administrator account when Windows starts
up.
* Screen display may differ depending on operating system, but the
procedure remains the same.
S
tep
1
Check USB ports
Check the USB port on your computer.
USB port
Any USB port may be used.
●
This product can be connected to a USB hub. However, it may
●
not work depending on the power supply capability of the
USB hub.
S
tep
2
Installing the Receiver Unit
Activate the Macintosh.
Wait until Mac OS X has started up completely.
●
Insert the receiver unit into a USB port on your Macintosh.
USB port
Receiver unit
Insert here.
Carefully check the orientation of the connector and
●
the place where you will connect the receiver unit.
If you feel strong resistance when inserting the
●
receiver unit, check that the shape and orientation of
the connector is correct. Using excessive force may
damage the connector and cause injury.
The mouse driver is installed automatically.
S
tep
3
Checking wheel operation
Check that the vertical scrolling functions are working correctly in
Safari.
Click the Safari icon in the Dock.
Safari will launch.
If Safari is not in the Dock, double-click the
Safari icon in the Applications folder.
Display your favourite web site in Safari and change the
size of the window so that the vertical scrollbars appear.
* The sample website used here is the ELECOM homepage.
Scrollbar
Scroll the wheel back and forth.
The mouse is operating normally if the screen
moves up and down as you scroll the wheel.
In applications that do not support scrolling, the screen will
not move when you scroll the wheel.
When using Mac OS X®
Display Device Manager.
Windows® 7 and Windows Vista®
●
1
. From the [Start] menu, right-click [Computer].
2
. Click [Properties].
3
. Click [Device Manager].
Windows® XP
●
1
. From the [Start] menu, right-click [My Computer].
2
. Click [Properties].
3
. Click the [Hardware] tab.
4
. Click
.
The Device Manager window appears. Right-click the
unknown device, and click [Uninstall].
Click
.
Disconnect the receiver unit and
restart the PC.
Repeat the procedure from “Step 2 - Installing the Receiver
Unit” on the front of this sheet.
Wireless Laser Sensor Mouse
M-D19DL Series
User's Manual
1st edition, September 10, 2010
ELECOM Co., Ltd.
This manual is copyright of ELECOM Co., Ltd.
•
Unauthorised copying and/or reproducing of all or part of this manual is
•
prohibited.
The specifications and appearance of this product may be changed
•
without prior notice for product improvement purposes.
ELECOM Co., Ltd. shall bear no responsibility for any and all affects
•
resulting from the use of this product regardless of the above reasons.
Export or service transaction permission under the Foreign Exchange and
•
Foreign Trade Control Law is required in order to export this product or
parts of this product that constitute strategic materials or services.
Windows and the Windows logo are trademarks of the Microsoft group of
•
companies.
Mac, Mac OS, and Macintosh are registered trademarks or trademarks of
•
Apple Inc., in the United States
Company names, product names, and other names in this manual are
•
generally trademarks or registered trademarks.
©2011
ELECOM Co., Ltd. All Rights Reserved.
廢電池請回收
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不
得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；
經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設
備之干擾。
당해 무선설비는 운용 중 전파혼신 가능성이 있음 .
B 급 기기 ( 가정용 정보통신기기 )
이 기기는 가정용으로 전자파적합등록을 한 기기로서
주거지역에서는 물론 모든 지역에서 사용할 수 있습니다 .
ELECOM CO., LTD.
1-1 Fushimi-machi 4-Chome Chuoku, Osaka Japan 541-8765
宜麗客（上海）貿易有限公司
上海市徐匯区肇嘉浜路1065甲号飛雕国際大厦704号
電話 : 86-21-33680011
FAX : 86-21-64271706
URL : http://www.elecom-china.com/
ELECOM (SHANGHAI) TRADING CO. , LTD.
Rm 704 , Feidiao International Bldg , 1065 ZhaoJiaBang Rd , Shanghai
, China 200030
TEL : 86-21-33680011
FAX : 86-21-64271706
URL : http://www.elecom-china.com/
Elecom Korea Co., Ltd.
5F Suam Bldg. 1358-17, Seocho2-dong, Seocho-gu, Seoul 137-862,
Korea
TEL : 1588-9514
FAX : (02)3472-5533
URL : www.elecom.co.kr
Basic specifications
Product name
Wireless laser sensor mouse
Article No.
M-D19DL Series
OS
Windows 7 (up to SP1),
Windows Vista (up to SP2)
Windows XP (SP2 to SP3)
Mac OS X 10.5 to 10.5.8, 10.6 to 10.6.7
Resolution (dpi)
800/1600 (Switchable)
Interface
USB
Radio frequency
2.4 GHz bandwidth
Radio wave method
FH-SS modulation
Radio wave outreach
Non-magnetic substance (e.g. wooden desk):
Approx. 10 m
Magnetic substance (e.g. metal desk): Approx. 3 m
* Test values in the ELECOM environment
Mouse body dimensions 56.0 (W) x 92.0 (D) x 36.8 (H) mm
Receiver Dimensions
15.0 (W) x 17.5 (D) x 6.0 (H) mm
Operating temperature/
humidity
5 to 40°C, 90% RH max. (no condensation)
Storing temperature/
humidity
-10 to 60°C, 90% RH max. (no condensation)
Batteries
AAA alkaline battery, AAA manganese battery,
rechargeable AAA nickel hydride battery
Operating time
Measure of the operating time when an AAA alkaline
battery is used
Continuous operating time: Approx. 128 hours
Continuous standby time: Approx. 187 days
Estimated serviceable time: Approx. 59 days
(when the PC is operated for eight hours a day and 25%
of the PC operation is assigned to mouse operation)