- 1 -
Batteries
CAUTION
For this product, use AAA alkaline batteries, AAA
manganese batteries or rechargeable AAA nickel hydride
batteries.
If this product will be unused for a long period of time,
remove the battery to avoid battery leakage and failure.
Cleaning the Mouse
If the product body becomes dirty, wipe it with a soft, dry cloth.
Use of a volatile liquid (paint thinner, benzene, alcohol,
etc.) may affect the material quality and colour of the
product.
Cautions for Wireless Equipment
This product is wireless equipment using the entire range of the 2.4 GHz
band and it is possible to avoid the band of mobile object identification
systems. GFSK is used for the radio wave method. The interference
distance is 10 m.
The 2.4 GHz band is also used by medical equipment, Bluetooth, and
wireless LAN equipment conforming to the IEEE802.11b/11g/11n
standard.
Before using this product, check that there are no other “radio
•
stations”* operating nearby.
If electromagnetic interference occurs between this product and
•
other “radio stations”, move this product to another location or stop
using this product.
* Other “radio stations” refer to industrial, scientific and medical devices
using the 2.4 GHz band like this product, other radio stations of this
type, licensed radio station premises for mobile object identification
system that is used in factory production lines, certain non-licensed
low power radio stations and amateur radio stations.
WARNING
Do not use this product with a device that may have a
●
serious function or influence. There are rare cases where
an external radio wave at the same frequency or the
radio wave emitted from a mobile phone causes this
product to malfunction, slow down, or fail to operate.
Do not use this product in a hospital or other locations
●
where the use of radio waves is prohibited. The radio
waves of this product may affect electronic and medical
devices (e.g. pacemaker).
The use of a wireless mouse in an aircraft is prohibited by
●
aviation law because doing so may interfere with flight
safety. Turn off the power of the mouse body before
boarding an aircraft and do not use it in the aircraft.
* ELECOM is not liable for any accident or social
damages incurred by the failure of this product.
Cautions for Laser Mouse
Though this product complies with the IEC60825-1 Class 1 laser
safety standard to ensure safety, pay special attention to the
following before use.
(1) Never observe the laser beam by using an optical measure
such as a microscope or magnifier or view the laser with the
naked eye for a long period of time. Doing so may have an
adverse effect on the eye. (Some laser beams cannot be seen
with the naked eye.)
(2) Never aim the rear surface of the mouse at a person’s eyes, as
this is very dangerous.
(3) The laser sensor may not work on glass or mirrored surfaces.
(4) Do not use this product for any application other than as a PC
mouse.
(5) If this product is subjected to temperatures beyond its
specifications, turn off the PC, and do not use the product
until the temperature returns to the operable range.
(6) If this product is not operating normally, turn off the PC.
Package Contents
This product’s packaging contains the items listed below. Before
using the product, check that all items are present. We make
every effort to ensure that all products are packaged correctly.
However, in the event that an item is missing or damaged,
contact the retailer from whom you purchased the product.
Mouse x1
•
Receiver unit x1
•
AAA alkaline battery x2
•
User’s Manual x1
•
Safety Precautions
Part Names
Preparation before Use
S
tep
1
Check USB ports
Check the USB port on your computer.
USB port
Any USB port may be used.
y
This product can be connected to a USB hub.
y
However, it may not work depending on the power
supply capability of the USB hub.
S
tep
2
Installing the Receiver Unit
Activate the PC.
If Windows® prompts you to choose an account (a user
●
name) when it starts up, be sure to log on using an
administrator account.
Wait until Windows® has started up completely.
●
Insert the receiver unit into the USB port of the PC.
USB port
Receiver unit
Insert here.
Carefully check the orientation of the
y
connector and the place where you will
connect the receiver unit.
If you feel strong resistance when inserting
y
the receiver unit, check that the shape and
orientation of the connector is correct. Using
excessive force may damage the connector
and cause injury.
The mouse driver is installed automatically.
S
tep
3
Checking wheel operation
Check that the mouse scrolls up and down correctly in
Windows® Internet Explorer.
Display your favourite web site in Internet Explorer
and change the size of the window so that the
vertical scrollbar appears
* The sample website used here is the ELECOM homepage.
Scrollbar
Scroll the tilt wheel back and
forth. The mouse is operating
normally if the screen moves
up and down as you scroll the
tilt wheel.
In applications that do not support scrolling, the
screen will not move when you scroll the tilt wheel.
In order to use this product’s horizontal scrolling
function, you must download and install ELECOM
MouseAssistant 2 for Windows from our company’s
web site.
Proceed to “Using the horizontal scrolling and button
allocation functions” on the reverse of this sheet.
Click either of the links on the page to proceed to
the next page.
Operation is normal if pressing the Back button (
)
takes you to the previous page and pressing the Forward
button (
) takes you to the next page.
In certain applications, the function will not work
when you press the Back or Forward buttons.
When using Windows®
Meaning of symbols
WARNING
Failure to observe precautions
may result in serious personal
injury or death due to fire,
electric shock, or other causes.
CAUTION
Failure to observe precautions
may result in personal injury
due to electric shock or other
causes, and may damage
other equipment.
Prohibited action
Mandatory action
Situation that needs attention
Notes and reference information
Observe these precautions carefully to avoid
personal injury, damage, fire, and other problems.
WARNING
If a foreign object (water, metal chip, etc.)
enters the product, immediately stop using
the product and disconnect the receiver
unit from the PC, and remove the battery
from the mouse. If you continue to use the
product under these conditions, it may
cause a fire or electric shock.
If an abnormality is found with this product
(emission of heat, smoke or abnormal smell
from the product), immediately stop using
the product, shutdown the PC, and after
thoroughly checking that heat from the
product will not cause burns, disconnect
the receiver unit from the PC, and remove
the battery from the mouse. After doing
this, contact the retailer from whom you
purchased the product.
Do not drop or hit this product.
If this product is damaged, immediately
stop using the product and disconnect the
receiver unit from the PC, and remove the
battery from the mouse.
If you continue to use the product under
these conditions, it may cause a fire or
electric shock.
WARNING
Do not attempt to disassemble, modify
or repair this product by yourself, as this
may cause a fire, electric shock or product
damage.
Do not put this product in fire, as the
product may burst, resulting in a fire or
injury.
Do not connect or disconnect the receiver
unit with a wet hand, modify the receiver
unit or bend it forcibly, as this may cause a
fire or electric shock.
The receiver unit contains small parts that
could be swallowed by a child. Ensure that
the unit is stored in an area where it is not
accessible to children.
CAUTION
Do not place this product in any of the
following environments:
In a car exposed to sunlight, a place exposed
•
to direct sunlight, or a place that becomes
hot (around a heater, etc.)
In a moist place or a place where condensation
•
may occur
In an uneven place or a place exposed to
•
vibration
In a place where a magnetic field is generated
•
(near a magnet, etc.)
In a dusty place
•
This product does not have a waterproof
structure. Use and store this product in a
place where the product body will not be
splashed with water or other liquid.
Rain, water mist, juice, coffee, steam or
sweat may also cause product damage.
When you no longer need to use this
product and the battery, be sure to
dispose of it in accordance with the local
ordinances and laws of your area.
Mouse
Receiver unit
Left button
Used for left-click operation.
Right button
Used for right-click operation.
Tilt Wheel
The tilt wheel can be turned back and forward with your
finger or pressed like a button to operate the PC.
Tilting the tilt wheel to the right or left lets you scroll
horizontally.
You must download and install ELECOM MouseAssistant
2 for Windows from ELECOM website to use the high-
speed scrolling function and the horizontal scrolling
function with Windows.
Using the horizontal scrolling and button allocation
functions (See reverse)
d
Forward button/
e
Back button
Back button
Performs the back
action in a web browser.
Push the buttons in
from the side direction.
Forward button
Performs the forward
action in a web browser.
Forward button
Proceeds to the next
browser screen
Back button
Returns to the previous
browser screen
To use the Back and Forward buttons with a Mac, you need
to install the ELECOM Mouse Assistant 2 Mac OS X version
that can be downloaded from the ELECOM website.
Using the button allocation functions (See reverse)
Remaining battery level indicator lamp
Indicates when to replace the batteries.
* When power is on, the lamp temporarily lights green to
indicate that there is sufficient battery life, and begins
flashing when battery life is low. If battery life becomes low
during use, the lamp will temporarily flash green.
Receiver unit housing
Used to store the receiver unit.
Battery cover
This cover is removed to install batteries.
Battery housing
Batteries are inserted here.
Battery removal sheet
Used to remove the batteries from the battery housing.
Laser sensor
When the mouse body is moved, this sensor detects mouse
movement.
* Avoid looking directly at the light of the sensor as doing so
may cause eye damage. Some laser beams cannot be seen
with the naked eye.
Power switch
Used to turn the mouse body on and off.
USB connector (Male)
Connected to a PC USB port.
S
tep
1
Check USB ports
Check the USB port on your computer.
USB port
Any USB port may be used.
y
This product can be connected to a USB hub. However,
y
it may not work depending on the power supply
capability of the USB hub.
S
tep
2
Installing the Receiver Unit
Activate the Macintosh.
Wait until Mac OS X has started up completely.
●
Insert the receiver unit into a USB port on your
Macintosh.
USB port
Receiver unit
Insert here.
Carefully check the orientation of the connector
y
and the place where you will connect the receiver
unit.
If you feel strong resistance when inserting the
y
receiver unit, check that the shape and orientation
of the connector is correct. Using excessive force
may damage the connector and cause injury.
Do not directly touch the USB connector terminal.
y
The mouse driver is installed automatically.
S
tep
3
Checking wheel operation
Check that the vertical and horizontal scrolling functions are
working correctly in Safari.
Click the Safari icon in the Dock.
Safari will launch.
If Safari is not in the Dock, double-
click the Safari icon in the Applications
folder.
Display your favourite web site in Safari and
change the size of the window so that the vertical
and horizontal scrollbars appear.
* The sample website used here is the ELECOM homepage.
Scrollbar
Scroll the tilt wheel back and forth.
In applications that do not support scrolling, the
y
screen will not move when you scroll the wheel.
To use the Back and Forward buttons with a Mac,
y
you need to install the ELECOM Mouse Assistant 2
Mac OS X version that can be downloaded from the
ELECOM website.
Proceed to “Using the horizontal scrolling and button
allocation functions” on the reverse of this sheet.
When using Mac OS X
Thank you for purchasing the ELECOM M-NE3DL Series 5-button wireless laser mouse.
This manual describes the operating instructions and safety precautions for using the M-NE3DL
Series. Ensure that you have read this manual before using the product. After reading this
manual, store it somewhere safe for future reference.
* Except in certain cases, the M-NE3DL Series is referred to as “this product” in this manual.
5-button wireless laser mouse
M-NE3DL Series
User's Manual
Installing·Replacing the Battery
Before using this product, install two AAA batteries in the mouse
body.
Remove the battery cover.
Insert the batteries.
Make sure that the
y
polarity is correct.
Install the battery cover as
before.
Replacing the Battery
Remove the battery cover.
Remove the batteries using
the battery removal sheet.
Insert the batteries.
Do not mix different types of batteries or
use old batteries with new batteries to avoid
battery leakage and failure.
Install the battery cover as before.
Turning On and Off the Mouse
Turning on the mouse
When using this product, turn the mouse body
power on.
Slide the power switch to the ON position.
The remaining battery level indicator lamp is illuminated in red for a
certain period.
* When the remaining battery level is low, the remaining battery
level indicator lamp is flashed in green for a certain period.
Turning off the mouse
When not using this product, turn the mouse body
off to save battery power.
Slide the power switch to the OFF position.
Restoring from sleep state
Click the right mouse button.
To reduce battery drain, the mouse enters sleep mode
automatically if it is left without being operated for a certain
period of time with the power or switch turned on.
Inserting and Taking Out the Receiver Unit
Inserting the receiver unit
Place the receiver unit into the
receiver unit housing.
Taking out the receiver unit
Take the receiver unit out of the
receiver unit housing.
Disconnecting the receiver unit
This product is hot-pluggable. It is possible to disconnect the
receiver unit when PC is running.
Operation may become unstable if the receiver unit is
disconnected and reconnected several times when PC is
running. If this occurs, restart PC.
