Vcc Trig Echo GND
Timing diagram
The Timing diagram is shown below. You only need to supply a short 10uS
pulse to the trigger input to start the ranging, and then the module will send out
an 8 cycle burst of ultrasound at 40 kHz and raise its echo. The Echo is a
distance object that is pulse width and the range in proportion .You can
calculate the range through the time interval between sending trigger signal and
receiving echo signal. Formula: uS / 58 = centimeters or uS / 148 =inch; or: the
range = high level time * velocity (340M/S) / 2; we suggest to use over 60ms
measurement cycle, in order to prevent trigger signal to the echo signal.
