background image

| 11

How to turn ON/OFF on the collar?

To turn ON/OFF the collar, press the (картинка кнопки 

включения) button for 3 seconds still until the collar 

beeps and the indicator lights up.

Is the collar waterproof?

Yes, it is. You can use the collar in any weather 

condition. 

Is the collar rechargeable, or do I need batteries?

The current model of the bark collar is rechargeable. 

Use the USB cable with the device and charge it via 

PC, laptop, or adapter.

I’ve got two dogs. If I use the bark collar with one 

dog, will it activate when the other dog barks?

No, it won’t. The bark collar has a special protection 

system from false detection, and the sensor detects 

and recognizes the throat vibration of the dog to 

which it is initially set.

My dog barks, but the collar is not activated. Why? 

Check the battery and perform a full test. If the 

collar tests correctly, you will need to either increase 

the sensitivity level by pressing to make it easier to 

activate or tighten the collar as it might be too loose.

FAQ

If our product didn't help you solve the problem with 

excessive barking, don't hesitate to contact our 

support team at [email protected], and we will 

help you or reimburse the purchase.

IMPORTANT!

Содержание DC-656












Отзывы: