E-ink 14 segment display
The battery status is indicated by a 14 segment Eink display.
The battery is fully charged when the 14 Eink segments are
black, and as the battery discharges the segments turn white.
The battery is completely discharged when all 14 Eink
segments are white.
Discharge
Charge
Time to charge may vary depending on the chargers being
used and temperature, among other variables.
The evo2 batteries can be charged with the supplied charger
or with compatible chargers.
Rated voltage of the charger should not exceed 12.6 V
Recommended standard charge 1.2 A Maximum current
permitted 3.2 A
Continuous discharge 640mA/0.2C, relative capacity at
25oC~ 100%
Maximum continuous discharge 6.4A/2C, relative capacity at
25oC~ 95%
Maximum discharge peak 9.4A
The battery display turns white after total discharge of battery.
Warranty of the evo2 battery
6 month warranty.
Caution
Never short circuit the terminals.
Do not expose the battery to heat or a fire source.
The battery should always be kept clean and dry, away from
water or wet environments.
Do not manipulate the battery. In case of manipulation, the
warranty is no longer valid.
For long term storage, the battery should be charged to 50%
of its capacity, and recharged every 3 months.
Check the charge status every 3 months and recharge. Do not
store the battery discharged, as it might cause irreversible
damages.
Do not use the battery if there are any impacts, dents, etc.
If for any reason a battery loses its charge and remains
uncharged for a long period of time, make sure to check the
battery before charging. Voltage between terminals must be
more than 7.5 V. If the voltage is under this value, do not
attempt to charge the battery and proceed to send it to our
technical service.
!
Use chargers recommended by the manufacturer to
charge the batteries.
Recommendation:
