Disclaimer: This brochure is for information only. The manufacturer reserves the right to modify specifications.
10
24v cc charger
230v charger
OPERATION
Plug in the corresponding connector to the vehicle’s lighter socket (lighter connector)
and connect the jack at the other end of the cable to the battery.
Charger specially designed for lithium ion cells and packs.
IMPORTANT
This adapter/charger should be used only in vehicles with a
24-volt connector.
Specifications
Technical specifications
Number of cells
Input voltage
Output voltage
Output intensity
Charge indicator
Charge complete indicator
Dimensions
Weight
Recommendations
6 Li-ion cells in series
100V - 240V 50Hz - 60Hz 0.15 max
25.2V
1A max.
Yes, by red LED
Yes, by green LED
52 x 33 x 75 mm
/ 2,05 X 1,30 X 2,95 Inches
135 g
/ 0,30 Lbs
For interior use only
Only recharge Li-ion packs
* Recommendation:
Although battery charging
cuts off when the charging
process is complete, the
adapter/charger should be
disconnected once the pro-
cess has finished (2.5 hours).
Working modes
Power settings
Display information
The remote can work in 2 different modes:
> ‘One button’ mode:
‘elebia®’ button: open and closes the hook.
> ‘Two buttons’ mode:
‘elebia®’ button: closes the hook
‘mode’ button: opens the hook
To switch between modes, press and hold the
‘elebia®’ button for 10 seconds.
The power of the motor can be adjusted in an
elebia® technical service.
0 to 9: autohook battery level
A:
remote battery is low
.
(just autohooks with magnet sensor): the
ring sling or handle is in position, ready to
close the hook.
C:
it’s time for maintenance of your autohook.
1b:
you’ve entered the ‘one button’ mode
2b:
you’ve entered the ‘two button’ mode
b:
the remote doesn’t detect the hook
- battery is not inserted.
- battery is off
- battery is empty
