10
800.925.1491
|
R E C O M M E N D E D T O O L S
The following list of tools will make your installation a smooth process and give the best results:
Parts:
Base Support (Part A)
Mortar Type:
N/A
a) Place the Base Support in its final installation location.
The firebox will be centered on this unit.
b) Use shims to level the Base Support, if necessary.
B E G I N B A S E
A S S E M B L Y
1
Parts:
Isokern Firebox Base Plate (Part 1)
Mortar Type:
Isokern Mortar
a) Set the Isokern Firebox Base Plate in a full bed of Isokern
Mortar flat on the Base Support.
b) Level the Base Plate by floating it in a bed of Isokern Mortar to
full bearing against the underlying Base Support surface.
P L A C E I S O K E R N
F I R E B O X B A S E
2
Parts:
Base Sleeve (Part B)
Mortar Type:
N/A
a) Place the Base Sleeve over the Base Support and Plate
assembly with access openings facing front of Fireplace.
The Base Sleeve should fit snug and level around both the
Base Support and Plate pieces.
C O M P L E T E B A S E
A S S E M B L Y
3
F I R E P L A C E I N S T A L L A T I O N S T E P S
The following steps combine the Sherwood components with the Isokern components to create a durable, time-tested masonry outdoor
fireplace. Sherwood components are identified with letters, and Isokern components are identified with numbers.
7. Tape Measure
8. Caulking Gun
9. 2 Step Stools
4. Pencil
5. Level
6. Framing Square
1. Flathead Screwdriver
2. ¾" Wrench
3. 3⁄₁₆" Drill Bit
10. Gloves (recommended
for handling GFRC)
11. Power Mixer (optional)