Eldom RW20, Руководство по эксплуатации

Страница: 6 / 15

Operating instruction
HAIR STRAIGHTENER RW20
2
General description
Technical data
1. Pliers
2. Holes carrying
out steam
3. Ceramic plates
4. Power cable
5. Temperature
increase (HIGH)
6. On/off switch
7. Temperature decrease (LOW)
8. Wyświetlacz LCD
- power: 65W
- supply voltage: 230V ~ 50Hz
Operating
HOW TO USE THE APPLIANCE
- make sure that the power cable
(4)
has no contact with the appliance
- insert the power cable into the socket
- after switching the appliance on by pressing the on/off switch
(6)
the LCD display
(8)
will glow and “LO” notice will appear, then the temperature indication changes until the
appliance reaches about 160
o
C. By pressing
(5)
and
(7)
the temperature can be changed
in the range 120-200
o
C.
- after use press the on/off switch
(6)
and remove the power cable from the socket
- wait until the appliance cools down completely before putting it away
The appliance remembers the last temperature set. After another switching on the hair
straightener reaches the last temperature set by the user.
The temperature set by the user usually changes (decreases) in contact with wet hair. The
appliance systematically corrects the temperature and its changes and current state are visible
on the LCD display
(8)
.
OPERATION
- the appliance is intended for hair straightening
- the hair must be combed, clean, slightly wet or dry
- the appliance cannot be used for artificial hair
- separate your hair into strands of several centimeters, put it between the plates
(3)
and
clamp it firmly, then move the appliance slowly from the roots towards the hair tips
- ceramic coat of the plates
(3)
protects the hair against excessive temperature
owing to smooth heat distribution
- the hair should not be kept in the straightener for more than 20 seconds
- The hair should be combed after having been cooled down
5
1
3
4
6
7
8
6