Operating instruction
R
HAIR STRAIGHTENER RW19
1
2
General description
Technical data
1. Pliers
2. Ceramic plates
3. Power cable
4. On/off switch
5. Control lamp
- power: 30W
- supply voltage: 230V ~ 50Hz
HOW TO USE THE APPLIANCE
START
- make sure that the power cable (3) has no contact with the appliance
- insert the power cable into the socket
- turn the appliance on by pressing the on/off switch (4), the control lamp will (5)
glow. After about 2 minutes the appliance is ready to use
- after use press the on/off switch (4) and remove the power cable from the socket
- wait until the appliance cools down before putting it away
OPERATION
- the appliance is intended for hair straightening
- the hair must be combed, clean, slightly wet or dry
- the appliance cannot be used for artificial hair
- separate your hair into strands of several centimeters, put it between the plates
(2)
and clamp it firmly, then move the appliance slowly from the roots towards the hair tips
- ceramic coat of the plates (2) protects the hair against excessive temperature owing
to smooth heat distribution
- the hair should not be kept in the straightener for more than 20 seconds
- the hair should be combed after having been cooled down
4
5
3
3
