Eldom ColumbiaVac OPC1200, Руководство пользователя

Страница: 24 / 68

24
TECHNICAL DATA
GENERAL DESCRIPTION
1. Control panel
2. Indicator
3. Body
4. Wheels
5. Handle
6. Inlet filter
7. Tube
8. Water tank
9. Wheels
10. Power cord
Dehumidification capacity
12l/24h (30°C, RH80%)
6,5l/24h (27°C, RH60%)
Rated voltage AC220-240V, ~ 50Hz
Rated power 172W (27°C, RH60%)
Maximum power 200W (30°C, RH80%)
Rated current 1,1A (27°C, RH60%)
Maximum Rated current 1,2A (30°C, RH80%)
Water tank 2l
Noisiness ≤38dB(A)
Maximum working pressure on the suction/
outlet side
0,7MPa/3,2MPa
Maximum allowable pressure on the high/low
pressure side
3,2MPa
Maximum permissible pressure of the heat
exchanger
3,2MPa
Device weight 10kg
Chemical name R290/50g
INSTRUCTION MANUAL
AIR DEHUMIDIFIER
OPC1200
EN
INSTALLATION
If the device is tilted by more than 45°, it shall be kept upright for at least 24 hours
before starting.
Choosing the place for installation (Fig.3)
The device must be placed vertically on a flat surface, in a dry and spacious location. The
room should be ventilated. At least 20 cm of clearance should be left around the device.
Water accumulates in the tank (8) . An attached hose (7) can be used for water discharge.
The method of installation is described in “CONTINUOUS WATER DISCHARGE” section.
OPERATION OF THE DEVICE
Any changes in settings are signalled by a sound.
The illuminated indicator (2) signals the air relative humidity level:
- blue – relative humidity below 46%,
- green – relative humidity between 46 and 64%,
- red – relative humidity above 64%.