1
4
2
3
General description
Technical details
1.
First speed switch
2.
Second speed switch
3.
Motor unit
4.
Drive shaft
- Rated power: 200W
- Mains supply: 230 V ~ 50 Hz
- Brief operation without interruption - 30 seconds
- Time of the interruption before switching on again – 5 minutes
Operation overview
Do not extend the recommended operation time of the blender. Such extensions and lack of
interruptions can cause serious and irreversible damage of the motor unit.
In case of blocking pull the plug of the socket before cleaning.
R
Before using the blender for the first time please disassemble the
drive shaft (4), wash it carefully and dry. It should be washed by
hand with regular dishwashing liquid. Never immerse the whole
blender in water. The only washable part is the drive shaft with
metal blade. The mode of assembling the device has been
illustrated on the photography 2. To begin the work press and
hold the first (1) or second (2) speed switch. The blender is
working as long as one of the switches is pressed. By pressing
second switch (2) the greater working speed of the blade is
achieve.
It is recommended to read carefully the safety instructions specified below.
Hand blender BL50N
4
phot. 2
Instruction manual
Cleaning and maintenance
Before cleaning pull the plug of the socket. The device cannot be immersed in water or
washed in a dishwasher. Motor unit should be cleaned dry with a slightly moist cloth. The
drive shaft can be disassembled from the motor unit and cleaned in water with dishwashing
liquid. It can never be immersed entirely in water. Only the blades can be immersed.
Never clean the blades with fingers use brush instead.
Do not use sharp or abrasive clothes or sponges for cleaning as they can scratch or
damage the blender.