eldoLED LINEARdrive Скачать руководство пользователя страница 4

4

Disclaimer

All information and content available on or accessible through the eldoLED website, all information con-
tained in any eldoLED documentation, whether provided electronically or in hardcopy, such as product 
manuals, and all information and content in e-mails or other ways of communication used by eldoLED, 
(collectively hereafter referred to as: ‘the Information’) has been prepared solely fro the purpose of pro-
viding information about eldoLED products and teh eldoLED companies (“eldoLED”as used herein, re-
fers to eldoLED B.V. and any of its affiliated companies.) While the content hereof has been prepared by 
eldoLED with the utmost care, some information may nevertheless be incomplete, incorrect or may be-
come outdated in time. TO THE FULLEST EXTENT PERMISSIBLE BY LAW, ELDOLED MAKES NO 
REPRESENTATIONS OR WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED, FOR 
THE CURRENCY, ACCURACY, OR COMPLETENESS OF ANY INFORMATION, AS DEFINED 
ABOVE. FURTHERMORE, ELDOLED MAKES NO REPRESENTATIONS OR WARRANTIES IN CON-
NECTION TO ITS PRODUCTS, INCLUDING WARRANTIES ABOUT ITS PRODUCTS’ MERCHANTA-
BILITY OR FITNESS FOR A PARTICULAR PURPPOSE, UNLESS EXPLICITLY MADE AND 
PROVIDED BY ELDOLED IN WRITING TO THE PURCHASER OF ITS PRODUCTS. The provided In-
formation must not be relied upon in connection with any investment decision.

eldoLED B.V. cannor be held liable for any direct or indirect loss or damage resulting from the use of the 
Information and/or resulting from the use of its products or material(s), except in the event of actions 
verging on eldoLED’s gross intent or intentional recklessness. ELDOLED’S MAXIMUM AGGREGATE 
LIABILITY FOR ANY CAUSES WHATSOEVER, AND REGARDLESS OF THE FORM OF ACTION, 
WILL AT TIMES BE LIMITED TO 100,- EURO OR THE PURCHASE AMOUNTS PAID TO ELDOLED, 
IF ANY, IN CONNECTION TO THE PRODUCTS ON WHICH THE LIABILITY CLAIM IS BASED.

All intellectual property rights relating to the Information and all eldoLED products, belong to and remain 
with eldoLED B.V. and/or its licensor(s) at all times. The Information and the eldoLED products may not 
be used in any way without eldoLED B.V.’s and/or its licensor’s prior explicit written consent.

eldoLED develops and produces building blocks for control of LED lighting. Continuous technological in-
novation beiong one of the pillars of eldoLED’s company philosophy, eldoLED has developed and con-
tinues to develop breakthrough solutions in the filed of solid-state lighting. eldoLED’s steadily growing IP 
portfolio proves eldoLED’s commitment to help its customers to bring SSL applications to a higher level. 
Because of eldoLED’s leading position in the field and its sophisticated knowledge of the market, it is 
very unlikely that its products infringe upon intellectual property rights of third parties. However, due to 
the nature of intellectual property protection (e.g the secretive nature of patent applications), eldoLED, 
like any other company, cannot give any warranties in this respect. Furthermore, eldoLED cannot vouch 
for any system built by a third party in which eldoLED’s building blocks are comprised.

The laws of the Netherlands govern this website and (the use of) the Information, the sale and use of 
any of the eldoLED products, and all business relationships between eldoLED and third parties. Disputes 
will be submitted exclusively to the applicable judge of the court in ‘s-Hertogenbosch, the Netherlands. 
ANY CAUSE OF ACTION ARISING OUT OF OR RELATED TO THIS WEBSITE, (THE USE OF) THE 
INFORMATION, OR ANY OF THE ELDOLED PRODUCTS, MUST COMMENCE  WITHIN ONE (1) 
YEAR AFTER THE CAUSE OF ACTION ACCRUES. OTHERWISE, SUCH CAUSE OF ACTION IS 
PERMANENTLY BARRED.

©

 All rights reserved eldoLED 2007-2009

Содержание LINEARdrive















































Отзывы: