©
2016 eldoLED. All rights reserved. V4.1
More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.
Quick Start Guide LINEARdrive 720D
(LIN720D3)
Connecting and configuring LINEARdrive 720D
A
Removing the cover
B
Removing the strain reliefs
C
Mounting the LINEARdrive
LINEARdrive
Intelligent LED Driver/Controller
IEC61347
EN55015, IEC61003, EN61547
130
M
VDC in: SELV equivalent
: 99% typ.
Ta: -20°C to + 50°C
: +65°C
Tc
LINEARdrive 180D
Ext in +
Ext in
DMX in +
DMX in -
DMX in shield
LedSync thru +
LedSync thru -
LedSync shield
-
TC
1
2
3
Group
Group
Group
Group
LED
4
12-28V / 6A Direct voltage controlled LED driver
TC
Group 1
LINEARdrive 720D
Group 1 GND
Group 2
Group 2 GND
Group 3
Group 3 GND
Group 4
Group 4 GND
Ext in +
Ext in
DMX in +
DMX in -
DMX in shield
LedSync out +
LedSync out -
LedSync shield
-
DALI out -
DALI out +
DALI in -
DALI in +
12-28V / 24A Direct voltage controlled LED driver
ø 4.2 mm / 0.17”
10 mm / 0.39”
30 mm / 1.18”
21.5 mm / 0.85”
110 mm / 4.33”
D
Making the wire connections
M
2
1
0.2-1.5 mm
2
2
1
9 mm
0.35 inch
0.5-1.5 mm
2
AWG 20-16
9 mm
0.35 inch
AWG 24-16
VDC and LED connectors:
Other connectors:
DMX in shield
DMX in +
DA +
DA -
DA +
DA -
DMX in -
Ext in +
Ext in -
{
12 -48VDC IN
-
+
LedSync shield
LedSync out +
LedSync out -
LED groups
Power
supply
R
R
R
R
LINEARdrive 720D
12-28V / 24W Direct voltage controlled LED driver
TC
Group 1
Group 1 GND
Group 2
Group 2 GND
Group 3
Group 3 GND
Group 4
Group 4 GND
Ext in +
Ext in
-
DMX in +
DMX in -
DMX in shield
LedSync out +
LedSync out -
LedSync shield
DA -
DA +
DA -
DA +
E
Fastening the strain reliefs
F
Configuring the LINEARdrive
G
Replacing the cover
LINEARdrive 180D
Ext in +
Ext in
DMX in +
DMX in -
DMX in shield
LedSync thru +
LedSync thru -
LedSync shield
-
TC
1
2
3
Group
Group
Group
Group
LED
4
12-28V / 6A Direct voltage controlled LED driver
LINEARdrive
Intelligent LED Driver/Controller
IEC61347
EN55015, IEC61003, EN61547
130
M
VDC in: SELV equivalent
: 99% typ.
Ta: -20°C to + 50°C
: +65°C
Tc
CAUTION: The device may only be connected and installed by a qualified electrician. All applicable regulations, legislation and building
codes must be observed. Incorrect installation of the device can cause irreparable damage to the device and the connected LEDs.
