Eldes ESIM264, Руководство по установке

Страница: 6 / 60

10 11 10 11 EN EN MANUAL ELDES ESIM264 V3.2 MANUAL ELDES ESIM264 V3.2
2. TECHNICAL SPECIFICATIONS
2.1. Electrical and Mechanical Characteristics
Electrical and Mechanical Characteristics
Mains power 16-24V 50 Hz ~1.5A max / 18-24V 1,5A max
Current in standby without external sensors and keypad Up to 80mA
Recommended backup battery voltage, capacity 12V; 1,3-7 Ah
Recommended backup battery type Lead-Acid
Backup battery charge current Up to 900mA
GSM modem frequency 850/900/1800/1900MHz
Cable type for GSM/GPRS antenna connection Shielded
Number of zones on-board 6 (ATZ mode: 12)
Nominal zone resistance 5,6kΩ (ATZ Mode: 5,6kΩ and 3,3kΩ)
Number of PGM outputs on-board 4
On-board PGM output circuit
1 R
OUT
Open Collector Output.
Output is pulled to COM
when turned ON.
Maximum commuting on-board PGM output values 4 x Voltage – 30V; current – 500mA.
BELL: Siren output when activated Connected to COM
BELL: Maximum cable length for siren connection Up to 100m (328.08ft)
BELL: Cable type for siren connection Unshielded
AUX: Auxiliary equipment power supply voltage 13,8V DC
BELL+AUX: Maximum accumulative current of auxiliary equipment and
siren
1 A
AUX: Maximum cable length for auxiliary equipment connection Up to 100m (328.08ft)
AUX: Cable type for auxiliary equipment connection Unshielded
BUZ: Maximum current of mini buzzer 150mA
BUZ: Power supply voltage of buzzer 5V DC
BUZ: Cable type for mini buzzer connection Unshielded
Supported temperature sensor model Maxim®/Dallas® DS18S20, DS18B20
Maximum supported number of temperature sensors 1
DATA: Maximum cable length for 1-Wire communication Up to 30m (98.43ft)
DATA: Cable type for 1-Wire communication Unshielded
Supported iButton key model Maxim®/Dallas® DS1990A
Maximum supported number of iButton keys 5
Maximum supported number of keypads 4 x EKB2 / EKB3
Y/G: Maximum cable length for RS485 communication Up to 100m (328.08ft)
Y/G: Cable type for RS485 communication Unshielded
MIC: Maximum cable length for microphone connection Up to 2m (6.56ft)
MIC: Cable type for microphone connection Unshielded
Wireless band ISM868 /ISM 915
Wireless communication range Up to 30m (98.43ft) in premises;
up to 150m (492.13ft) in open areas
Maximum supported number of wireless devices 16
Event log size 500 events
Maximum supported number of zones 44
Maximum supported number of pgm outputs 44
Cable type for zone and pgm output connection Unshielded
Communications SMS, Voice calls, GPRS network, RS485, CSD
Supported protocols Ademco Contact ID, EGR100, Kronos, Cortex SMS
Dimensions 140x100x18mm (5.51x3.94x0.71in)
Operating temperature range -20...+55°C (-4... 131°F)
Humidity 0-90% RH @ 0... +40°C
(0-90% RH @ 32... 104°F) (non-condensing)
2.2. Main Unit, LED and Connector Functionality
Main Unit Functionality
GSM MODEM GSM network 850/900/1800/1900MHz
modem
SIM CARD SIM card slot / holder
DEF Pins for restoring default settings
USB Mini USB port
FUSE F1 3A fuse
ANTENNA GSM/GPRS antenna SMA type connector
MODULES Slots for EA1, EA2 or EPGM8 module
EWT1 Slots for EWT1 wireless module
C4
C3
SMA
ANTENNA
FU
SE
3A
PW
R
Z4 Z3 Z2 Z1 C1 C2
NE
TW
O
R
K
Z5 Z6
ST
A
TU
S
EWT1
MODULES
SIM CARD
DEF
PRG
USB
OPEN
C
O
M
BELL- BELL+ G Y C2 A
U
X-
A
U
X+
A
C
/D
C
A
C
/D
C
Z1 CO
M
Z2 Z3 CO
M
Z4
D
A
T
A
+5
V
M
IC
-
M
IC
+
BU
Z
-
C1 BU
Z
+
C
O
M
C
O
M
Z6 Z5
G S M
MO DE M
AKU+
AKU-
1
LED Functionality
NETWORK GSM network signal strength and status
C2, C1
PGM output C1 and C2 status. Steady ON = turned ON; OFF
= turned OFF
Z1 Zone Z1 state (ATZ mode: Z1 and Z7). Steady ON = violat-
ed; OFF = restored.
Z2 Zone Z2 state (ATZ mode: Z2 and Z8). Steady ON = violat-
ed; OFF = restored.
Z3 Zone Z3 state (ATZ mode: Z3 and Z9). Steady ON = violat-
ed; OFF = restored.
Z4 Zone Z4 state ( ATZ mode: Z4 and Z10). Steady ON = vio-
lated; OFF = restored.
Z5 Zone Z5 state (ATZ mode: Z5 and Z11). Steady ON = violat-
ed; OFF = restored.
Z6 Zone Z6 state (ATZ mode: Z6 and Z12). Steady ON = vio-
lated; OFF = restored.
PWR Power supply status. Steady ON = power supply OK; OFF
= no power.
STATUS Micro-controller status. Flashing = micro-controller OK;
OFF = micro-controller fault.
NETWORK indication Description
OFF No GSM signal - SIM card
missing; PIN code enabled
on SIM card; GSM antenna
disconnected or faulty; GSM
operator’s fault; GSM signal
unavailable in the are
Flashing every 3 sec. Poor GSM signal strength
Flashing every 1 sec. Medium GSM signal
strength
Flashing several times per sec. Good GSM signal strength
Steady ON
Excellent GSM signal
strength
Connector Functionality
Z1 - Z6 Security zones
COM Common terminal for all zones
DATA 1-Wire® interface for iButton® key and temperature sensor connection
+5V Temperature sensor power supply contact (+5V)
MIC- Microphone negative terminal
MIC+ Microphone positive terminal
BUZ- Mini buzzer negative terminal
BUZ+ Mini buzzer positive terminal
C1 - C4 PGM outputs
Y RS485 interface CLOCK terminal (yellow wire)
G RS485 interface DATA terminal (green wire)
COM Common return terminal
BELL- Siren negative terminal
BELL+ Siren positive terminal
AUX- Negative power supply terminal for auxiliary equipment
AUX+ Positive power supply terminal for auxiliary equipment
AC/DC Mains power terminal
AKU- Backup battery negative terminal
AKU+ Backup battery positive terminal