1. Place SIM card in the holder.
Make sure that PIN code at SIM card is disabled
*1
.
2. Connect antenna and
plug power supply connector to the device.
Plug power supply to mains socket.
3. Set the English language
by sending SMS message
EN
to the mobile number of
the SIM card inserted in EPIR device.
4. Change the default password to a new one.
Send following SMS message:
In place of
XXXX
you should enter your new 4 digital password.
All other messages for programming must start with this password.
Underscore symbol ‘_’ in this manual is used to represent space typing.
5. Upload up to five different user mobile numbers
which will have access to control the system.
Send the SMS message with the following text
*2
:
It is not necessarily to enter all 5 users at once – start by entering the first one (
NR1
) with your own or
preferred mobile number. The other ones can be added later (
NR2, NR3, NR4 or NR5 users)
.
6. Set Date and Time.
Send following SMS message:
where
MMMM
means year,
mn
– month,
dd
– day,
va
– hour,
mi
– minutes.
7. The system is armed by a call from your mobile phone.
*3
Quick Start Guide
for ELDES EPIR users
In this guide you will learn how to quickly
set and run EPIR device manually
(using SMS messages for programming). Here are the most important steps:
0000_PSW_XXXX
XXXX_NR1:4411111111_NR2:4411111111_NR3:4411111111_NR4:4411111111_NR5:4411111111
XXXX_MMMM.mn.dd_va:mi
0000 PSW
1234
EN
1234 2010.0
2.03 20:15
1234 NR1:44
1111111 NR2
:4411111112
*1 - PIN code can be disabled by putting SIM card into mobile phone and following proper menu. *2 User must type mobile number in the interna-
tional format (it consist of only those digits that overseas callers must type: 44<area code><local number>) without symbol ‘+’. E.g. the mobile number
of user is +44 (0) 113 xxx xxxx, so the correct format to type is 44113xxxxxxx and the wrong ones – 440113xxxxxxx or 0113xxxxxxx *3 - device will use
controll preferences installed by manufacturer. It can be changed by user at any time.
