EWK3 WIRELESS KEYFOB
beep sounds, LED indicator (green) will light up, confirming a transferred command to ELDES alarm system via
wireless connection. Otherwise, EWK3 internal buzzer will emit 1 long beep sound and LED indicator (red) will
flash quickly, informing user about unsuccessful attempt to transfer command (due to the wireless connection loss
(out of range)).
Turn output ON – After the button is pressed, this function turns ON the selected PGM output. EWK3 internal
buzzer will emit 1 quick beep sound, LED indicator (green) will quickly flash once, confirming a transferred
command to ELDES alarm system via wireless connection (action success). Otherwise, EWK3 internal buzzer will
emit 1 long beep sound and LED indicator (red) will light up or flash quickly, informing user about unsuccessful
attempt to transfer command (due to the system’s violation (action failed) or the wireless connection loss (out of
range)).
Turn output OFF – After the button is pressed, this function turns OFF the selected PGM output. EWK3 internal
buzzer will emit 1 quick beep sound, LED indicator (green) will quickly flash once, confirming a transferred
command to ELDES alarm system via wireless connection (action success). Otherwise, EWK3 internal buzzer will
emit 1 long beep sound and LED indicator (red) will light up or flash quickly, informing user about unsuccessful
attempt to transfer command (due to the system’s violation (action failed) or the wireless connection loss (out of
range)).
Toggle (Output) – After the button is pressed, this function changes the status of the selected PGM output (ON
or OFF, depending on the previous status). EWK3 internal buzzer will emit 1 quick beep sound, LED indicator
(green) will quickly flash once, confirming a transferred command to ELDES alarm system via wireless connection
(action success). Otherwise, EWK3 internal buzzer will emit 1 long beep sound and LED indicator (red) will light
up or flash quickly, informing user about unsuccessful attempt to transfer command (due to the system’s violation
(action failed) or the wireless connection loss (out of range)).
Panic – After the button is pressed, this function triggers virtual panic alarm (NOTE: this action is available only
for Long Press setting). LED indicator (red) will light up and therefore confirm a transferred command to ELDES
alarm system via wireless connection, while EWK3 internal buzzer will remain silent (in case when Panic action is
set, keyfob’s buzzer is always disabled due to security reasons). Otherwise, EWK3 LED indicator (red) will flash
quickly, informing user about unsuccessful attempt to transfer command (due to the wireless connection loss (out
of range)).
Pulse – 1234… (coming up…)
Additionally, you make take find all the previously descripted actions in one image
(below):[/vc_column_text][vc_single_image image=”35276? img_size=”large”][/vc_column][/vc_row]
2.4. step-by-step guide
[vc_row][vc_column][vc_column_text]In order to pair the device with the alarm system, you’ll have to complete
the following:
1) Run ELDES Utility software.
3) In software’s menu, open Peripheral Devices section to see the list of all wireless devices;
2) When in Peripheral Devices section, press the keyfob button one time (any button on EWK3) and your keyfob
will instantly appear in the list;
3) Click Add to System button, located next to the unpaired wireless keyfob icon (grey icon);
4) Press the keyfob button (disarm button on EWK3) once to complete the pairing process.
5) If the pairing is successful, keyfob’s LED indicator (green) will lit up, and the icon next to EWK3 device will turn
GREEN.
6) EWK3 is ready for use.
NOTE: If you are unable to pair the wireless device, please restore the parameters of the wireless device to
7 / 10
