manualshive.com logo in svg

elddis 2013 Avante, Руководство пользователя

Поделиться
Скачать
elddis 2013 Avante Скачать руководство пользователя страница 75

10-2

SECURITY

DIAMOND STANDARD WHEEL LOCK
(Option Only)

How to fit your Diamond Standard Wheel
Lock

1.

The Diamond Standard Wheel Lock can only
be fitted to the nearside wheels.

2.

Move the caravan until the receiver is located
between the wheel spokes (Fig 1).

3.

Push the Diamond Standard Wheel Lock
between the rim spaces so that the bolt fits
into the receiver (Fig 2).

4.

Push the Diamond Standard Wheel Lock up
to the point where the base plate contacts
the rim (Fig 3).

5.

Lock the Diamond Standard Wheel Lock
with the attached key (Fig 4).

Hints for using the Diamond Standard
Wheel Lock

To keep the hole of the receiver clean, please use
the supplied plug when the Diamond Standard
Wheel Lock is not mounted.

Key Card

The number of the lock is only recorded on the
key card. Without this card you will be unable to
order any replacement keys.

Please keep your key card in a safe place and at
all times separate from the wheel lock.

A jack is required to fit the second wheel lock
and this is provided with your new caravan and
should only be used for this purpose.

Fig 2

Fig 3

Fig 4

Fig 1

Содержание 2013 Avante



























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды