Models
RT42X5004A01
Technical Details
Frequency:
868.3 MHz
Radiated power:
0.47 mW
Modulation:
FSK
Coding:
AES 128 Bit
Function:
4x PULSE
Power supply:
1x 3-V-battery, CR2032
Operating
Temperature:
-20 °C to +60 °C
Range:
free-field: approx. 150 m
buildings: approx. 30 m
Dimensions:
37 x 61,5 x 10,7 mm
Weight:
RT42: 30,0 g (incl. battery)
RT43: 18,0 g (incl. battery)
Scope of Delivery
Transmitter incl. battery CR2032, operating
instructions
Intended Use
The transmitters may only be used to operate
secwave radio receivers.
The transmitters may only be used in dry environ-
ments!
The manufacturer shall not be liable for any dam-
age caused by improper or non-intended use!
Safety Advice
Before using the transmitter, carefully
read through the operating instructions!
Note also the operating instructions of the radio
control.
Never operate doors or other items of equip-
ment without keeping them under watch as you
do so. Persons could be placed in danger!
Keep the transmitter away from children!
Check at regular intervals that the transmitter is
ready to transmit!
Have faulty transmitters checked by the manu-
facturer!
Do not make any unauthorized alterations or
modifications to the transmitter!
Keep the batteries out of the reach of children!
Function
The Hand Transmitters RT42/RT43 are radio
transmitters with 4-button operation. By pushing
the button the secwave code is transmitted and
the connected secwave receivers are switched
in their selected operating mode.
The transmitter has a battery check function,
which checks the capacity of the battery. If the
battery is weak, the LED flashs during transmis
-
sion.
RT42 Hand Transmitter
GB
Start-Up
The transmitter comes with a battery already in-
stalled. Once it is unpacked, it is ready for imme-
diate use.
Transfer every transmitter code to the radio recei-
ver. For this read the operating instructions sup-
plied with the radio controls.
Using the transmitter
Press the transmitter button, the LED lights up
and the code of the transmitter button is sent to
the receiver.
If the LED flashes after depressing the
trans-
mitter button, please change the battery.
Send learning telegram
Press the learn button PTx briefly and then a
transmitter button. A learning telegram will be
sent. With this telegram the learning mode on the
receiver is activated.
Precondition for this is:
- The receiver supports this feature.
- The transmitter has already been program-
med into the receiver.
Then, a new transmitter can be learned into the
receiver. Please read the operating instructions
supplied with the receivers.
Insert/change battery
1. Insert a small object (for example: slotted
screwdriver) into the slot on the back side of the
transmitter. Press the cover carefully upwards.
2. Replace the battery. Only use batteries of the
type CR2032.
Make sure the poling is correct. The
positive pole has to be visible!
3. Replace the cover back.
The coding of the transmiter is preserved
even if there is no voltage supply. You do not
need to memorize the code in the receivers
again after a battery change.
Trouble Shooting
- If the LED does not light up at all: exchange
the battery or make sure that the poling of the
battery is correct.
- If the LED flashes after the transmission proce
-
dure: exchange the battery.
- If the radio receiver doesn´t react: move closer
to the radio receiver or re-transfer the transmis-
sion code to the radio receiver.
Disposal
Waste electrical products and batteries not be
disposed of with household waste!
Dispose of the waste product via a collec-
tion point for electronic scrap or via your
specialist dealer.
Dispose of used batteries in a recycling
bin for batteries or via the specialist trade.
Put the packaging material into the recy-
cling bins for cardboard, paper and plas-
tics.
Warranty
Within the statutory warranty period we undertake
to rectify free of charge by repair or replacement
any product defects arising from material or pro-
duction faults.
Any unauthorized tampering with, or modifica
-
tions to, the product shall render this warranty
null and void.
Conformity
Hereby, ELDAT GmbH declares that the radio
equipment type RT42 is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conform-
ity is available at the following internet address:
www.eldat.de
Service
If, despite correct handling, faults or malfunctions
occur or if the product was damaged, please
contact your retailer or the manufacturer.
ELDAT GmbH
Im Gewerbepark 14
15711 Königs Wusterhausen
Germany
Phone: + 49 (0) 33 75 / 90 37-310
Fax:
+ 49 (0) 33 75 / 90 37-90
Internet: www.eldat.de
E-Mail: [email protected]
UM102458A
1017 D/GB
secwave radio
receiver
programming
button
P
LED
bracket
learning
button
PTx
battery
CR2032
transmitter button