UM99764A 0114 GB
Disposal
Conformity
If, despite correct handling, faults or mal-
functions occur or if the product was damaged,
please contact the company at the address
below:
ELDAT GmbH
Im Gewerbepark 14
15711 Königs Wusterhausen
Germany
Phone:
+ 49 (0) 33 75 / 90 37-0
Fax:
+ 49 (0) 33 75 / 90 37-90
Internet: www.eldat.de
E-Mail:
Waste electrical products and batteries
should not be disposed of with household
waste!
Dispose of the waste product via a
collection point for electronic scrap
or via your specialist dealer.
Dispose of used batteries in a recy-
cling bin for batteries or via the spe-
cialist trade.
Put the packaging material into the
recycling bins for cardboard, paper
and plastics.
This product conforms to the basic
requirements of the R&TTE
Directive 1999/5/EC.
For use in: EU/CH/FL/IS/N
The Declaration of Conformity can be found on
the Internet at: www.eldat.de.
Warranty
Within the statutory warranty period we
undertake to rectify free of charge by repair or
replacement any product defects arising from
material or production faults.
Any unauthorized tampering with, or modifica-
tions to, the product shall render this warranty
null and void.
Customer service
Fit accessories
Attach the wall bracket at the desired place of
installation using an adhesive pad or screws.
2 s
Troubleshooting
LED
F
flashes for 2 seconds when a button is
pressed:
-
Error during transmission of the wireless
signal. Re-programme the code. Check that
the wireless network is available.
-
The transmitter has not yet been
programmed in the control and the status
request is activated. Programme the code.
LED
F
flashes for 4 seconds when a button is
pressed:
-
The battery is almost empty: Change the
battery!
LEDs do not light up:
-
Check the transmitter battery.
LED
F
flashes for 2 seconds when a button is
pressed:
-
A Wheather sensor fault was reported by the
control. Check the sensor.
F
2 s
F
F
F
2 s
F
4 s
F
+
+
