Elcon Elconnect Fiber FOS 100, Краткое руководство по эксплуатации

Страница: 16 / 24

FOS 100
Ethernet
LAN
2
×
POTS
Fiber
Ethernet
Router
or
Bridge
2
×
POTS
VoIP
Figure 2: Block diagram
2 Installation
2.1 Hardware requirements / Minimum system requirements for installation of the
FOS 100
•
Power socket providing nominal voltage 230 V / 50 Hz
•
Deployed optical fiber cable from operational Access Switch
•
Laptop or PC running on OS Windows
®
98 SE, ME, 2000, XP; MAC; Linux and
full-duplex network interface card (interface: 10/100Base-T); CPU: Pentium II
®
,
500 MHz or higher
•
Diverse tools (water-level, pencil, drilling machine, drill Ø 6 mm, screwdriver)
2.2 Scope of delivery
•
1 FOS 100 with external plug-in power supply unit 12 V , 1.2 A
(AC/DC-Adapter GSP-1212 ELC/1)
•
1 drilling template
•
1 toolkit bag (2 dowels, 2 screws)
•
1 short operating manual
2.3 Selecting the place of installation / Fixing the device
The FOS 100 has been designed for in-house use in closed rooms as wall-mount unit. The
FOS 100 should be placed nearby the optical fiber running from the Access Switch and next
to a 230 V power socket. Since the FOS 100 is determined for continuous operation, it has no
mains switch. For disconnection from the electricity grid, just remove the plug-in power sup-
ply unit. So the wall power supply should always be easily accessible.
14
Version: 2009/01/29