Elcometer Protovale 120 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 19

Elcometer Protovale 120 Скачать руководство пользователя страница 2

E

n

g

li

s

h

R

This product meets the emc directive 89/336/EEC, amended 92/31/EEC and 93/38/EEC. The
Elcometer Protovale 120 Rebar Locator has been tested in accordance with EU regulations
governing Electromagnetic Compliance and it meets the required directives.

Note: Performance may be affected if the unit is operated within a radio frequency electromagnetic field
strength greater than 3V/m.

and Protovale are registered trademarks of Elcometer Limited.

All other trademarks acknowledged.

© Elcometer Limited. England. 2009.

All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored (in a retrieval
system or otherwise) or translated into any other language in any form or by means (electronic, mechanical,
magnetic, optical, manual or otherwise) without the prior written permission of Elcometer Limited.

A copy of this Instruction Manual is available for download on our Website via www.elcometer.com/
downloads.

Doc. No:TMA-0277 Iss. 03

Part No: 18550

DISCONTINUED

«
1
2
3
4
...
»

Содержание Protovale 120




















Отзывы:

Нет отзывов