ELCOM Uniq Tablet UT10, Руководство пользователя, Страница: 52 / 56

WHAT TO DO IN CASE OF PROBLEMS
If problems occur when using the device that prevent its proper use, please look over this chapter, which
will help you solve some common problems. If you do not find the solution to your problem in the table,
contact Elcom’s technical support team. You’ll find contact information on the Web site at www.elcom.eu. If
you have problems with the software applications not supplied by the company Elcom, contact the supplier
of the relevant application.
Problem Solution
After pressing the POWER
button the Uniq Tablet UT10
does not switch on. Check the power adapter connection, the LED on the adapter should be
lit and green – if it is not lit the problem is either with the electrical socket
connection or with the power adapter.
If after pressing the button the LED on the front panel does not light up and
the adapter is okay, then the probably a battery is discharged.
The Uniq Tablet UT10 starts
but after initial text messages
the operating system does
not start (the screen remains
black or blue with or without
text) WINDOWS: Connect an external keyboard and during starting up of the
computer repeatedly press the F8 key. A menu should appear from which
it is possible to select System restore to return to the previous state or start
the computer in Safe mode, where it is possible to perform setting to remove
the problem.
Connect an external keyboard and during the computer start up repeatedly
press the Delete key. This way you enter the system configuration program,
where you can change system settings (Beware: Only do this if you know
what you are doing!) or you can set standard system settings by selecting
Restore Defaults from the Save and Exit menu.
If the above-mentioned procedures fail, you may have the option of renewing the
operating system from the hidden disk partition. The procedure is described be-
low, in the section “Restoring the operating system in case of a malfunction”.
No image appears on the
display, or the display is too
dark or too light. If the control LED is blinking, press the POWER button; the device might
be in sleep mode.
Increase or lower the value of the brightness via the procedure presented
in the section “Setting the contrast and brightness“.
Image on the display is defor-
med or graphic elements are
too large or blurred. Check the settings for the screen resolution in the operating system. For the
internal display the resolution should be set to a value of 1024 × 768.
Uniq Tablet UT10 does not
respond to commands from
the touch panel, or responds
faultily If it is not possible to control the Uniq Tablet UT10 at all, connect an external
mouse, and use it to launch the tools for calibration and setting of the touch
panel. Calibrate the touch panel.
There is no sound during mu-
timedia playback. Check the sound settings within your media player and your operating
system. Sounds could be muted or the volume set to a low value. Check
whether the drivers for the soundcard are installed and that correct device
is selected for the sound playback.
A connected USB device does
not work Check that the device is not switched off or is not in a power-saving mode.
Check that the port to which the device is connected is working correctly – con-
nect a simple device, for example a USB mouse to see if it works properly.
Check in the device manual whether it is necessary to install a driver or
some other program before it is connected.
52
Troubleshooting
ENGLISH