ELCOM Uniq Tablet ll, Руководство пользователя

Страница: 4 / 13

4
12.2” INDUSTRIAL GRADE LIGHTWEIGHT PORTABLE
RUGGED UNIQ TABLET ll
Thank you for your choosing the new Uniq tablet ll.
This guide serves to enable users to get to know and familiar with our product as soon as
possible. Here we have made a brief introduction to the key layout and definitions in figures
and words. And a brief explain for the basic operating functions.
IMPORTANT NOTICES
Please pay attention to the following notices. They will help you avoid possible damage to the device and
potential injury which could result from improper use of the device. With damage to the device caused by
non-observance of the procedures mentioned in these notices, the legal warranty expires due to improper
handling with the product.
• The device must be under permanent supervision while “ON“ or in “STAND BY“ mode until it is turned
“OFF“ by the central switch and disconnected from the electrical system.
• Do not leave the device unattended while charging.
• Use only the power adapter and cable approved by ELCOM. Unauthorized adapters or cables can cause
batteries to explode or damage the device.
• Improper adapter connection can seriously damage the device. Any damage caused by misuse is not
covered under warranty.
• Do not remove the battery before disconnecting the power adapter. This could damage the device.
• Do not charge the device when the power cord is damaged or if the electrical outlet is not grounded.
This may cause electric shock or fire.
• If the device overheats, starts to smoke, makes strange noises or strange smells, immediately turn off
the main power switch and unplug the device.
• Do not bend the power cord or place heavy objects on it. Stepping on the power cord or its disruption
with heavy object could result in electric shock or fire.
• During a storm or when the device is out of service for longer, unplug the power adapter from the
electrical outlet to prevent electric shock or fire.
• Install the product in a place where it will not be exposed to direct sunlight, unusual changes in tem-
perature (below 0°C and over 35°C) or high humidity. Installation in an unsuitable place could cause
damage to the casing and electrical components.
• Upon carrying the product from a cool environment to a warm one, or vice versa, do not switch it on
for at least 30 minutes.
• The product should be operated by a person with wet hands.
• Clean the external surface with a soft, dry cloth. Never use caustic cleaning agents. The use of such
chemicals could lead to damage to the product. Do not clean the product with sprayed water and do
not submerge the product in water.
• If the product is not working properly, take it to an authorized service center technician. Do not attempt
to repair the product yourself. Do not open the product!
• Use only the AC/DC adapter provided or an adapter recommended by an authorized dealer. The use of
other types of adapters may result in damage to the adapter or the product. First connect the power
cable to the Uniq PC, and only afterwards to the power source!
• Notice: The adapter is designated for interior use only!