I02-118 User manual & maintenance guide
Version 04
(translation of the original manual)
of TLM 1000
Page
1
sur 25
1
GENERAL INFORMATION
1.1
Important remarks
The following instructions will be used as technical documentation for the manufacturer of the
final machine.
elcom
is the supplier of this TLM 1000 transfer system sub-assembly .
The manufacturer of the final machine must make sure that:
-
All safety equipment is provided and functional,
-
Regular checks are carried out,
-
All danger (pinching, squashing) due to moving parts is controlled,
-
The documentation is complete.
1.2
Applicable standards
According to the 2006/42/CE European directive,
elcom
transfer systems are considered as partly
completed machines. They are therefore not subject to an EC declaration of conformity but are the
subject of a declaration of incorporation. The latter is transmitted at the time of delivery,
accompanied by the exploded view of the motorized equipment.
However, the following standards are taken into account during the design and the manufacturing of
the
elcom
transfer systems:
–
The European Machinery Directive 2006/42/CE
–
The European Low Voltage Directive73/23/CE
elcom
ensures an adequate follow-up and products quality formalized by the ISO 9001 certification.
For environmental reasons,
elcom
also meets the requirements of the ISO 14001 standards.
1.3
Applications
The elements of the linear TLM 1000 transfer systems are designed to carry and position workpiece
carriers according to the end customers’
configuration.
They are intended to be incorporated the customers' production line.
1.4
Conditions of use
The elements of the TLM 1000 transfer systems are suited for a use in normal industrial areas such as
a final assembly plant or equivalent, in a dry environment.
They are not suited for transporting materials such as sand, balls or grain.
The maximum load applicable on the transfer system is mentioned in the catalog and must never be
ignored.
To ensure a proper functioning of the transfer system on a maximum period of time, you must follow
this advice:
-
Use temperature between 0 and 40°C (30 and 140°F)
-
Avoid dusty or smoky atmosphere
-
Avoid accumulation of sharp objects on the transfer system
-
Avoid setting the machine in direct exposition to UV rays
