ELCOM
14
2.4 Assembly of stand to table
2.4.1 Assembly of angle to post
!
"
#
$
Assemble parts 1, 2, 3 and 4 together by figure,
so that matrix (4) will go into groove of post (6).
Set needed position of steel angle (5). Three steel
angles are installed on the post. It is necessary
that all steel angles are on the same position
(height), the stand will be standing vertical after
its fixation to table.
2.4.2 Assembly of stand to table
"
Drill a hole 59 mm in diameter on the
table (1) and put a plastic inlay (4) in-
side the hole. The post stand with an-
gles (2) take through the hole from be-
low and fix it with screws (3) to table.
S
Top view.
Index Part name
1
Socket head cap screw M4x10
2
Flexible washer M4
3
Steel angle
4
Nut M4
5
Assembled steel angle
6
Post
Index Part name
1
Washer
2
Post
3
Screw 4x16
4
Plastic inlay
