I02-244 User & maintenance manual
Version 03
(translation of the original manual)
of
TLM2000 ITS 24 V
Page
19
of
32
8
WIRING THE 24V DRIVES MOTORS
TLM 2000 ITS 24V is not delivered with a pre-wired motor. The motor interface is to be made by a
connector.
The power connections are composed of the following pins:
PIN C
0V
PIN B
+ 24 V
PIN A
Non utilisé (ballast)
The control connections are composed of the following pins:
PIN 12
Connected to the + 24 V
PIN 3
Speed of 9m/min (IN1) wired on the + 24V
PIN 4
Speed of 12m/min (IN2) wired on the +24 V
PIN 3 + 4
Speed of 16 m/min
Vitesse d’avance de 16 m/mn câblé sur le + 24 V
PIN 1
Wired on the + 24 V, for pulling (Right position drive motor) or for pushing
(Right position drive motor)
PIN 2
Wired on the + 24 V, for pulling (Left position drive motor) or for pushing
(Left position drive motor)
CAREFUL : Pin B and Pin C of the power connections and the Pin 12 of the control connections have
to be powered before the wires controlling the speed and rotating direction of the drives.
