ELCOM Euro-50iTE Mini, Руководство пользователя

Страница: 24 / 91

24
Programming the cash register
4) After selection of a specific parameter, a value is set either by manually entering a numerical value (pri-
ce, EAN,...), entering text on the keyboard (names of PLU, DPT, sales units,...) or by pressing the arrow
keys

or

. After setting a correct value, confirm it by pressing the

TOTAL, button; the newly
programmed parameters is then printed out.
5) Should you make a mistake when entering a numerical value or text, you can remove the incorrectly
entered character by pressing the

CLEAR button.
6) If there is no necessity to change (save) a given parameter, it is possible to pass to another item using
the arrow keys

or
�
or to leave the given menu by pressing the

(MENU) button.
7) Complete the programming by pressing the

(MENU) button.
TIP: Press

or
�
to switch between equal parameters for individual items. For example, when
programming the name of the first product item, after pressing
�
you automatically switch to program-
ming the name of the second product item.
Printing of programmed values
Use the

VOID button to print out all active items in the given menu.
Revision of programmed values
1) In order to change the setting of any parameter, switch the cash register into P-mode and find the rele-
vant parameter in the menu.
2) Enter the new value and confirm by pressing the

TOTAL key.
Note:
Proceed according to the chapter „ Basic rules for navigating in a menu“.
Warning:
Some parameters can be changed only after meeting the requirement for a change (for example a daily,
monthly Z report, an exchange rate setting,...); conditions for a change will be presented along with the
specific parameters.
Editing text in EditMode
EditMode function is for edit and add new text. It’s started at text entry, right after entering new text, when
the old content is deleted or by pressing the key [*], the old text will be not deleted, and the text could be
changed.
In the EditMode, the following keys can be used:
�
– Enter/Cancel EditMode. Entering the EditMode is indicated with the cursor “_”
 – move cursor to left,
� – move cursor to right,

– move cursor to left side of the line
� – move cursor to right side of the line
 – start/cancel input or change text (InsertMode). The input mode is identified with the sign “_”

– start / cancel writing numbers (NumLock)