ELCOM EK-7000, Руководство пользователя

Страница: 7 / 13

7
EK-7000
serves for programming the updated data from the program to the keyboard.
read the keyboard programming...
serves for reading the programmed values from the keyboard to the program.
renew the firmware...
serves for putting a new version of the firmware onto the keyboard.
notice
all of these possibilities require connecting a keyboard to a computer using a UsB port.
clear all keys
serves for clearing the current programmed keys in the program on the computer.
changes to the keyboard
a change to the keyboard serves to allow the user to change the type of keyboard from the current to the new
type (change the number of layers used).
notice
reducing the number of layers causes a loss of data for removed layers as well as the switched layers which
are not appropriate for the new type of keyboard. changing the keyboard back does not allow for the recall
of such data.
change in layers
if a user needs to change individual layers, this is possible to do using this functionality.
setting keyboard parameters
the keyboard parameters can be changed on the first tab.
setting rfiD parameters
some keyboard models also contain an rfiD (radio frequency identification) module, which serves for detec-
ting codes from an rfiD key. on the basis of a scanned 13-place numerical code, a sequence will be generated
for pressing the corresponding numbered keys.
in the window with the scrollbar „number of digits“, set the number of valid digits which will be used from the
entire 13-place code which you obtain from the rfiD key.
the row „Prefix“ sets the key and the modifier, which will be sent prior to the code itself obtained from the rfiD
key.
the row „suffix“ determines the key and modifier which will be sent after sending the rfiD code.
the „clear“ buttons are used to clear the set values.
Using the field „Use numerical keys“ you can set the type of numbers generated: a checked field means that the
codes for the keys will be generated in the numerical part of the keyboard.
types of keys
select a mode for the keys:
• Make-Break: key does not repeat (implicitly).
• Typematic: allows for the repeating of a key upon its being held down.
Pause between codes
time between sending of two scan-codes from the keyboard: 1–255 ms, implicitly 3 ms.
rapid repeating
setting for the speed of repeating of keys: 2–30 characters/s (valid for typematic types), implicitly 11 charac-
ters/s.