4
•
Replace all panels before operating.
•
It is recommended that a separate circuit serving only your appliance
be provided. Use receptacles that cannot be turned off by a switch or
pull chain.
•
Never clean appliance parts with flammable fluids. These fumes can
create a fire hazard or explosion. And do not store or use gasoline or
other flammable vapors and liquids in the vicinity of this or any other
appliance. The fumes can create a fire hazard or explosion.
•
Before proceeding with cleaning and maintenance operations, make
sure the power line of the unit is disconnected.
•
Do not connect or disconnect the electric plug when your hands are wet.
•
Unplug the appliance or disconnect power before cleaning or
servicing. Failure to do so can result in electrical shock or death.
•
Do not attempt to repair or replace any part of your appliance unless
it is specifically recommended in this manual. All other servicing
should be referred to a qualified technician.
FOLLOW WARNING CALLOUTS BELOW ONLY WHEN
APPLICABLE TO YOUR MODEL
•
Use two or more people to move and install the appliance. Failure to
do so can result in back or other injury.
•
To ensure proper ventilation for your appliance, the front of the unit
must be completely unobstructed. Choose a well-ventilated area with
temperatures above 60°F (16°C) and below 90°F (32°C). This unit
must be installed in an area protected from the elements, such as
wind, rain, water spray or drips.
•
The appliance should not be located next to ovens, grills or other
sources of high heat.
•
The appliance must be installed with all electrical, water and drain
connections in accordance with state and local codes. A standard
electrical supply (120 V AC only, 60 Hz), properly grounded in
accordance with the National Electrical Code and local codes and
ordinances, is required.
•
Do not kink or pinch the power supply cord of the appliance.
•
The size of the fuse (or circuit breaker) should be 15 amperes.
•
It is important that the appliance be level in order to work properly.
You may need to make several adjustments to level it.
•
All installations must be in accordance with local plumbing code
requirements.
