ELCART
Manuale di istruzioni/Scheda tecnica
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
Tel. ++39 02.25117310 Fax ++39 02.25117610 sito internet: www.elcart.com e-mail: [email protected]
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
The divulgation of data contained on this technical sheet are exclusively for informational reasons and establish no link on behalf of Elcart regard to thr performances and the usa of the product.
La divulgacion de los datos contenidos en esta ficha son un servicio unicamente informativo y no constituyen ningun vinculo de parte de Elcart respecto a las prestaciones y uso del producto.
ART. 13/17000-00
ART. 13/17100-00
PAGINA 12 DI 14
10 Rectifying faults
If you have detailed questions on the specifications of the
inverter please contact us.
Remedy
Cause
Fault
No output voltage, LED not Illuminated
Bad connection between battery and inverter.
Internal fuses defect.
Check the cables and contact
In this case send the unit back to supplier.
No output voltage OVERTEMP LED
illuminates
The inverter has been over-heated.
Switch off the inverter and the power consuming units.
Wait for approx. 5 - 10 minutes and switch on the
inverter only.
Reduce the loading and ensure a better ventilation
for the inverter.
Then switch back on the consuming unit.
Overload LED illuminates
unit is too high.
Possibly, there is a short circuit in the
consuming unit.
Switch off the inverter and disconnect the
consuming units.
Switch back on the inverter only.
If the OVERLOAD LED is off, there is a short circuit at
the consuming unit or the total load was higher than the
performance specified within the technical data table.
Check the connecting cable of the consuming unit for
mechanical damages.
Acoustic signal in case of loading
Battery voltage too low. In case of loading
battery voltage falls below 10.7 V
The battery must be recharged.
Current consumption of the consuming
11 Guarantee
Our general guarantee conditions apply. If the product is defective, please send it back to us.
For repair and guarantee processing, the follow ing documents must be sent along with the device:
A copy of the receipt with purchasing date
A reason for complaint or description of the fault
12 Disposal
12.1 Disposing of packaging material
Do not simply throw the packaging material away. Please observe the following instructions:
The cardboard packaging material should be disposed of in a wastepaper bin.
Ask your local authority for the location of the recycling centre closest to you.
12.2 Disposing of the device
If you wish to finally dispose of the device, take it to the nearest recycling centre or return it to your specialist dealer
who will be happy to take it back for a small fee.
*
*
