ELCART
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
Tel. +39 02.25117310 Fax +39 02.25117610 sito internet: www.elcart.com e-mail: [email protected]
Manuale di istruzioni/Scheda tecnica
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
The divulgation of data contained on this technical sheet are exclusively for informational reasons and establish no link on behalf of Elcart regard to thr performances and the usa of the product.
La divulgacion de los datos contenidos en esta ficha son un servicio unicamente informativo y no constituyen ningun vinculo de parte de Elcart respecto a las prestaciones y uso del producto.
ART. 12/23080
PAGINA 2 DI 3
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
Tel. ++39(0)2/25.11.73.10 Fax ++39(0)2/25.11.76.10 sito internet: www.elcart.com e-mail: [email protected]
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
INSTRUCTION MANUAL FOR WALL BRACKET PANEL TV LCD/PLASMA
ART. 12/23080
1. Technical parameter:
Maximum load:
30 kg.
Size of flat panel TV:
15”÷37”
Distance from wall:
10mm
Weight:
0.31 kg.
2. Part list:
Please check the parts in the package in comparison with the following list.
Make sure all of the parts are in the package.
Never use defective parts.
Never replace part with different specification.
Note: Incorrect installation may cause injury!
3. Installation and operation instructions
Note: please read the instructions carefully before installation!
No
Name of part
Material
Amount
A Self-tap screw
Standard part
2
B Plastic anchor
Standard part
2
C Ø5 * Ø16 * 1.5 washer
4
D
4
E M5*15 screw
Standard part
4
F
Standard part
4
G
Standard part
4
M6*15 screw
M8*15 screw
M4*15 screw
Standard part
Standard part
Use the wall plate as a templet to drill two holes
of Ø 8mm and 50mm depth in the concrete wall.
Then wedge two plastic concrete anchors into the
holes.
Screw two self-tapping bolts into the foresaid two
plastic anchors through the mounting holes in the
wall plate to fix the wall plate on the wall tightly and
flatly.
Put the steel cable on to the two TV connection circle as shown in the fig., then hang the TV together
with the TV connection circle and steel cable onto the wall plate. Don’t relax hands until hung firmly.
The display can be support from wall using the two bottom connection circle on the back of the TV
Refer to your TV manual to determine the diameter of the screw, spacer and washer necessary or
choose an appropriate these accessories to the size, height and position of the holes on our TV.
Select four suitable bolts from the parts bag and attached the TV connection circle to the back of the
TV tightly. Note: The washer (C) is only used for bolts (D or E).
MADE IN CHINA
