4000 4 362-02-19
7/8
ENGLISH
DEFAULT PARAMETERS
User name
admin
Password admin
IP address
292.168.0.7
Mask
255.255.255.0
Gateway 192.168.0.1
Work Mode
TCP Client
Local Port
0
Baud Rate
115200
Target Port
8234
Target IP
192.168.0.201
Parity bit/Data/Stop bit
None/8/1
6 QUICK
USE
Make sure that you just use one network card, then connect our serial server to the same LAN and power
on
1- Double click on short-on on the desk :
2-click « Smart VCOM » in the toolbar. Then it search our serial server within the LAN
3- Device searched appear. Click ”Next” config the mark the device and create virtual serial port.
4- Click “Finish” after created, virtual serial port list “Net State” show “Connected (x)”
Send data to serial port with hyper Terminal (example), the list change :
