PowerOn:function
A
Ok
To change the function use the jog encoder. Functions are:
1)
No Func
: nothing happens when switched on
2)
Start
: starts a show in normal playback when switched
on
3)
Loop
: starts a show in loop when switched on
For function 2 and 3 (start, loop) it is possible to select a show
number. To change the number, press and hold
B
and use the
jog encoder.
“Show - -“ means the current selected show will start/loop
after switching on the
ShowSTORE
.
Press
A
to confirm the function, or press
Quit
to cancel.
MultiShow enable / disable
The
ShowSTORE
can run up to 4 shows simultaneously,
controlled by the parallel (GPI-) input contacts.
MultiShow: off
A
Ok
Use the jog encoder to enable / disable and confirm with
A
.
The four GPI’s must than be set for show start or loop.
The main screen will show:
1:> 2: 3: 4:
S01 L02 S03 L04
1:>
Æ
contact 1 activated
S01
Æ
single playback of show 01 on closing of contact
L02
Æ
loop playback of show 02 while contact is closed
Содержание ShowSTORE
Страница 1: ...ShowSTORE Software Version 3 0 ...
