ELC focus BRAIN XL Скачать руководство пользователя

Страница: 5 / 8

Selecting the Channel level

The channel level can be set in two ways, quick and precise,

selectable by dipswitch 3. The quick mode uses only 2 key

presses. The precise uses 3 or 4 key presses.

Quick level Mode

(dipswitch 3 is OFF)

To set a level in Quick level Mode press @ followed by 0 to 9

or Enter. 0 will clear the dimmer, 1 to 9 will give levels from

10% to 90% and Enter will give a level of 100%

… @ 0..9,Enter

1 @ 5

this will bring up dimmer 1 at 50%

34 @ 0

this will clear dimmer 34

Precise level Mode

(dipswitch 3 is ON)

To set a level in Precise level mode press @ followed by 1 or

2 digits and Enter. When entering 1 digit, this will set the level

in 10%-steps. Using 2 digits it’s possible to set the level in 1%

steps. Pressing Enter directly after @, the level becomes

100%.

… @ [0..9] [0..9] Enter

1 @ 5 Enter

dimmer 1 at 50%

1 @ 05 Enter

dimmer 1 at 5%

3 @ 25 Enter

dimmer 3 at 25%

Function Keys

With the Function key (Func) it is possible to call up the

secondary function of a key.

Adjusting level and stepping through channels

To step thru channels and adjust the level press Func, then

use

Down

Next

and

Prev

. When finished press Enter. The

function of

Down

Next

and

Prev

depends on the mode.

Focus Mode:

Up:

Increase level of currently selected channels

Down: Decrease level of currently selected channels

Next: Shift up the selected channels

Prev: Shift down the selected channels

Scene Mode:

Up:

Increase level of currently selected channels

Down: Decrease level of currently selected channels

Next: Shift up the selection of the channels

Prev: Shift down the selection of the channels

Selecting Focus or Scene Mode

With dipswitch 1 it’s possible to select the power up mode

focus/scene. This can be changed online by pressing:

Func

Focus

select focus mode

Func

Scene

select scene mode

Working with Groups

A group is a selection of 1 or more channels. The key is

used for groups. 50 groups (1 – 50) can be used.

To create a group, create a scene with all the channel you

want in the group at a level greater than 90%. This can also be

done by using the console connected on the DMX input.

To store the Group:

•

Press Func

•

Press (Thru)

•

Type in the group number

•

Press Enter

Using groups

Groups can be used during channel selection. The key is

used as GROUP.

Содержание focus BRAIN XL









Результаты поиска

Содержание focus BRAIN XL

Отзывы:

Похожие инструкции для focus BRAIN XL

Бренды по названию

Популярные бренды

ELC focus BRAIN XL, Руководство пользователя

Результаты поиска

Содержание focus BRAIN XL

Отзывы:

Похожие инструкции для focus BRAIN XL

Бренды по названию

Популярные бренды