ED706 - Delayed-ON Power Adaptor
ELBY Designs - Laurie Biddulph
9 Follan Close, Kariong, NSW 2250, Australia
2 of 2
Construction of the ED706 requires the assembly of 1 board:-
1. Main Board: ED706 PCB (
)
Constructors should refer to the
for any specific comments regarding
the board assemblies, the Bill of Materials for the current value of all components and
for general pcb assembly guidelines.
1. Fit all components to the boards following normal assembly guidelines, ensuring
that the taller components are kept close to the PCB to facilitate fitting the lid
2. Place the PCB assembly on to the base plate, locate the cover and secure using
the screws provided.
Calibration
The ED706 does not require any calibration but you may wish to adjust P101 to define a
preferred start-up delay.
