REBLE610 Fully indoor Microwave Link
Page 29 of 52
Version 1.4
8.1
Status.
Once the login process has been validated, the general stats page opens; it let the user immediately check
alarmed parts; the page is divided into 4 or 5 modules (depending on full duplex or half duplex
configuration), hereunder described.
8.1.1
Status-Controller.
Figure 49: Web Status form – controller.
Table 8: Controller Information.
Board Model
Controller board model
Version
Firmware version
Revision
Firmware version revision
Customer
Customer name
Location
Installation site
Device
Equipment configuration (Full-duplex,
Tx, Rx, Repeater)
From
Transmitting site
To
Receiving site
Serial Number
Ex.: REB610/10/00002/2012
Part Number
Ex.: REB610/FD1010-C/HP
Link Model
Ex.: REBLE610/10
Table 9: Power supply status.
Primary AC/DC
12V
output
of
main
supply
measurements; indication if AC/DC or
DC/DC. Line is green if value is
between limits, red otherwise.
Secondary DC/DC
12V
output
of
backup
supply
measurements; indication if AC/DC or
DC/DC. Line is green if value is
between limits, red otherwise.
Voltage 2 (5 V)
5 V level. Line is green if value is
between limits, red otherwise.
Voltage 3 (6 V)
6 V level. Line is green if value is
between limits, red otherwise.
