REBLE610 Fully indoor Microwave Link
Page 27 of 52
Version 1.4
Figure 42
:
Receiver menu.
Active areas:
Directional arrow “UP”
to go back to main menu.
The page also shows three icons that correspond to the alarm led
:
1.
An alarm for the oscillator status
2.
An alarm indicating the low field level received for the used modulation.
3.
An alarm indicating that the temperature of the module is higher than 55°C.
The page reports as well the measurements of the registered temperature and received field level (RSSI).
7.8
Menu Power Supply (PS).
The Power Supply menu allows verifying whether both power supply modules are fed, what type of feeding
they are receiving and whether the secondary voltages are correct (+5V and +6V).
Figure 43: Power Supply menu.
Active areas:
Directional arrow “UP”
to go back to main menu.
There is as well a general alarm indicator in case one of the voltage values is not being respected.
The upper zone of the menu is dynamically filled by the icon of the corresponding power supply module,
which can be in alternating or continuous current. It is hence possible to see the different combinations
reported in the following figures.
Figure 44: Icon power supply with continuous current,
primary position.
Figure 45: Icon power supply with continuous current,
secondary position.
