Elba S 61 X 631 F, Инструкция по использованию, Страница: 21 / 36

21
R
S
D
Fig. 6.1
SOME MODELS ONLY
REPLACING THE OVEN LIGHT BULB
WARNING: Ensure the appliance is
switched off before replacing the lamp
to avoid the possibility of electric shock.
• Let the oven cavity and the heating
elements to cool down.
• Switch off the electrical supply.
• Remove the protective cover.
• Unscrew and replace the bulb
with a new one suitable for high
temperatures (300°C) having the
following specifications: 220-240V,
E14 and same power (check watt
power as stamped in the bulb itself) of
the replaced bulb
• Refit the protective cover.
Note:
Oven bulb replacement is not
covered by your guarantee.
HOT PLATE
Foods burned on the hot plates must
always be cleaned dry. Do not use water
to avoid the forming of rust. After its use,
pour a bit of oil onto the warm plate and rub
with a cloth.
GLASS LID (MODELS WITH GLASS LID)
For cleaning purposes, the lid can be easily
removed upwards once taken to the upright
position.
Should the hinges slip off, replace them in
their housing being careful that:
• The right housing must receive the
hinge marked “ D ” while the left housing
must receive the hinge marked “ S ” (fig.
6.1).
REGULATING OF THE BALANCE
Lower the lid and check the correct balance.
While opened at 45° it should hang up.
The springs of the hinges can be adjusted
if necessary by turning the screws “ R ”
clockwise (fig. 6.1).
Do not shut lid when
burner alight.
ATTENTION
Do not lower the glass lid when the
gas burner or electrical plates are
still hot or when the oven is
working or still hot.
Do not lay on the glass lid hot pans
and heavy kitchen utensils.
Dry off any liquid whitch may have
spilt on the cover before opening it.
Models with glass lid