Drain Pump Filter
Drain pump filter can filter the yarns and small foreign matters from the washings. Clean
the filter periodically to ensure the normal operation of washing machine.
First, drain the water with drain pump and then open the drain pump to clean away
foreign matters from drain pump filter.
Take care if the drained water is hot.
Cleaning the Pump
According to the soil level within the cycles and the frequency of the cycles, you have to
inspect and clean the filter regularly.
The pump should be inspected if the machine does not empty and/or spin the machine
makes an unusual noise during draining due to objects such as safety pins coins etc.
blocking the pump.
Disconnect the appliance.
Wait until the remaining water has cooled down.
Open the bottom panel. Place a container close to the appliance to collect any spillage.
Unscrew the drain cover to remove all the dirt and blockage.
Always get ready a cloth nearby to dry up spillage of water when removing the cover.
Remove any objects from the pump filter by rotating it.
After washing, restore the pump filter and screw the drain cover fully in.
Close the bottom panel.
Warning!
When the appliance is in use and depending on the program selected there can be hot water in
the pump. Never remove the drain cover during a wash cycle, always wait until the appliance
has finished the cycle, and is empty. When replacing the drain cover, ensure it is securely
retightened so as to stop leaks and young children being able to remove it.
Open the bottom panel
Unscrew the drain cover
Remove the drain cover
Restore the cover after washing
