Elba ETP-C5023(GR), Руководство пользователя

Страница: 6 / 11

6
OPERATING THE APPLIANCE
To open the lid
Place the appliance on a flat and stable
surface and fill up the water tank with water.
To close the lid
Carefully close the lid by pressing down until a
click sound is heard.
Do not fill the water more than the full line
marking. Please refer to the maximum water
level marking under the product descriptions.
If the appliance is overfilled, it may cause
splashing, which might arise a hazard to the
user.
Do not close the lid by force as it may cause
hot water gush out and cause scalds!
To power on the appliance
Connect the receptacle to the appliance first,
and then connect the power plug to the wall
outlet.
Do not power on the appliance when the water
tank is empty.
1. Connect the receptacle to the appliance
horizontally.
2. When rotating the product body after
inserting the receptacle, be careful of the
connection and make sure it is not loosen.
To boil water
When switching on the power, the “BOIL” and
85
 C light indicators (in red) will turn on and
the water will start to boil.
Temperature at 85
 C is the default
temperature setting. During the boiling
process, the light indicator for 85
 C will blink.
Unless the boiling process is complete, or else
this light indicator will keep on blinking.
After the boiling process, the “KEEP WARM”
light indicator (in green) will be on.
WARNING :
1. Do not open the lid while the appliance is
operating.
2. Do not add or dispense the water while
water is boiling.
3. Do not contact the steam vent.
4. Do not place cloth or any other items to
cover the steam vent.