3.3 Wall-mount Bracket Installation
Pin up two self-tapping screws M4*20 (included) with a distance of 71.5mm in between
as shown in figure 3e. Fix the wall bracket (No.8) on the screws properly, see figure 3f.
Hang the small crevice nozzle (No. 9) and small dust nozzle (No. 10) on the
designated slot as shown in figure 3g.
It is recommended that the bracket to be placed near to a power socket for the ease of
charging.
4. OPERATION INSTRUCTION
4.1 Whole Unit
Turn on the appliance by pressing the power switch button located at the side of the
main unit (Figure 4a). The default power setting is high speed gear. To change the
speed to low gear, press the speed control button located at the back of the main unit
(Figure 4b). Press again to rotate the power setting.
To turn off the power, press the power switch button.
During operation, please pay attention to the battery capacity light shown in Figure 4c.
Blue light indicates the battery is fully charged. The light will turn to flashing orange light
if the battery power is low when using and eventually the light will go off when the battery
is fully depleted and the appliance will stop working automatically.
Speed control
button
Power
switch
Figure 4a
Figure 4b
Figure 3e
Figure 3f
9
10
Figure 3g
8
