HEATING-UP PHASE
Touch the heating-up phase and select the heating-up phase that you wish to apply. The
heating-up phase selection are Normal and Fast. Click the desire heating-up phase and your
selection will show as “
√
” behind the option. The default setting for the heating-up phase will be
Normal.
Click “OK” to save and return back to function interface.
7.4 Checking the water tank
When the program has began, the system will run for the water tank test first. If the water tank is
not in place, the system will show the warning as follow:
Place the water tank in the right position and start the program. If the water tank is in the right
position, the water pump will start working. The water pump will pump the water from tank into
the boiler. The water level sensor will automatically detect the water level. If the water is
insufficient, the system will appear the below message:
Open the oven door, refill the water tank until it is full and place the water tank in the original
place.
Then close the oven door and click “OK”. The pump will resume working and pump the
water until the water level sensor stop for the in injection. Boiler will start to boil the water.
14
